The Audi 100 Quattro is a Mid-Size luxury or executive car. It was produced by the German automaker, Audi from 1968 to 1994. During the development of 100 Quattro, many popular automatic transmission oil pump seal parts have been built. The torque converter powers the transmission pump and sends transmission fluid back to the transmission via cooling lines. The 100 Quattro automatic transmission oil pump seal can prevent any fluid from leaking. The automatic transmission oil pump seal parts prevent fluid from leaking and going past the torque converter shaft.
100 Quattro offers reliable and practical parts to customers. But there will be several problems after the automatic transmission oil pump seal parts have been used for years. The 100 Quattro automatic transmission oil pump seal parts can keep the transmission fluid in the oil pump. And the parts can also prevent any contaminants from entering the transmission pump. The removal process for the 100 Quattro automatic transmission oil pump seal parts is as follows. Disconnect the negative battery terminal. Drain the transmission fluid. And remove the transmission cross member. Then, remove the bell housing bolts. Drop the transmission from the vehicle. And pull the stall converter off the transmission shaft. Next, locate the oil pump (at the front of the transmission behind the stall converter). Remove the oil pump bolts. And finally, pull the pump off and remove the old seal using a blade. We guarantee consumers affordable shipping criteria. There are lots of great 100 Quattro parts on our site. And we offer practical 100 Quattro automatic transmission oil pump seal parts to customers. We are online for you 24/7.