Acura Legend Oil Filter

The Acura Legend production began in 1985 and was discontinued in 1995. It won Car and Driver's Ten Best three years in a row and Motor Trend's Import Car of the Year for 1987. During the development of Acura Legend, many popular parts have been built, such as oil filter parts. It helps keep the engine moving parts dirt free and allows it to run at its normal performance. The oil filter parts include the bypass and pressure relief valves.

Legend provides a large selection of high-performance parts. But after a long time, the worn oil filter parts might cause huge problems. Here are the tools needed to change: Oil filter wrench, Jack stands, Funnel, Oil container, Engine oil and Drain plug socket. The oil filter replacement is as follows. Firstly, raise the front of the vehicle and secure it properly with jack stands. Then, remove the drain plug using the correct size socket and position your oil container under the drain plug bolt location to catch all dirty oil. Remove it using the proper oil filter wrench. Then, reinstall the oil drain plug with a new gasket and torque to spec, and install your new oil filter hand tight, fill the engine with the proper capacity and start the engine for a couple of minutes. Finally, recheck the oil level after a couple of minutes of running and top off if needed. We have nearly all types of auto parts in our catalogue to give you a better vehicle both inside and out. We guarantee consumers reasonable and affordable shipping criteria.