< Back ×
My Vehicle Change Vehicle
2013 Ford Edge
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2013 Ford Edge Fuel Pump
PartNumber: AG9Z-9350-B
Product Specifications- Notes: Edge; FWD; 2.0l; High Pressure Pump
- Other Names: Fuel Pump
- Item Dimensions: 9.4 x 8.5 x 6.1 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: AG9Z-9350-AA
- Part Description: 2013 Ford Edge Fuel Pump
Vehicle Fitment- 2013 Ford Edge | Limited, SE, SEL | 4 Cyl 2.0 L GAS
$357.51 MSRP:$546.67You Save: $189.16 (35%)
Autobest® Electric Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: F1529Product Specifications- Notes: Strainer required to validate the warranty
- Average Current Draw(A): 9
- Average Flow Rating(GPH): 180
- Country of Orign: China
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 95
- Minimum Pump Pressure (PSI): 85
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 0.346
- Outlet Type: Hose
- Product Height (in): 1.5
- Product Length (in): 4.51
- Product Width (in): 1.5
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Chip
- UPC: 00072845115294
- Voltage: 12V
- Weight (lbs): 0.66
- Wire Harness Included: No
- Part Description: 2013 Ford Edge Electric Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
$27.02
OEM (Genuine) 2013 Ford Edge Fuel Pump
PartNumber: DT4Z-9H307-A
Product Specifications- Notes: Edge; FWD; 3.5l, 3.7l; W/O AWD, 3.5, 3.7 Liter
- Other Names: Fuel Pump
- Item Dimensions: 25.2 x 14.6 x 14.8 inches
- Item Weight: 6.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: BT4Z-9H307-D, PFS-582-IEW
- Part Description: 2013 Ford Edge Fuel Pump
Vehicle Fitment- 2013 Ford Edge | Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
$256.14 MSRP:$427.27You Save: $171.13 (41%)
Delphi® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: FG1311Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 7
- Flow Rating: 60 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 94.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 2
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 58 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604232774
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
$166.21
OEM (Genuine) 2013 Ford Edge Fuel Pump
PartNumber: BT4Z-9H307-C
Product Specifications- Notes: Edge; AWD; Primary; W/AWD
- Other Names: Fuel Pump
- Item Dimensions: 10.2 x 17.9 x 14.1 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2013 Ford Edge Fuel Pump
Vehicle Fitment- 2013 Ford Edge | Limited, SE, SEL, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
$373.86 MSRP:$623.64You Save: $249.78 (41%)
Delphi® Left Fuel Tank Sending Unit for 2013 Ford Edge
PartNumber: FT4002Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Item Grade: Standard Replacement
- Outlet Outside Diameter: 0.500''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Package Contents: Fuel Transfer Unit with Float Arm, Instruction Sheet
- Regulator Included: No
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604265154
- Vapor Pressure Sensor: No
- Part Description: 2013 Ford Edge Left Fuel Tank Sending Unit
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
$76.44
OEM (Genuine) 2013 Ford Edge Fuel Pump
PartNumber: DT4Z-9H307-C
Product Specifications- Notes: Edge; FWD; 2.0l; Primary; W/O AWD, 2.0 Liter
- Other Names: Fuel Pump
- Item Weight: 5.80 Pounds
- Replaces: CT4Z-9H307-E, DT4Z-9H307-B, CT4Z-9H307-F, PFS-970, PFS-617
- Part Description: 2013 Ford Edge Fuel Pump
Vehicle Fitment- 2013 Ford Edge | Limited, SE, SEL | 4 Cyl 2.0 L GAS
$248.51 MSRP:$414.55You Save: $166.04 (41%)
OEM (Genuine) 2013 Ford Edge Fuel Pump
PartNumber: BT4Z-9275-A
Product Specifications- Notes: Edge; AWD; Secondary; W/AWD
- Other Names: Fuel Pump, Fuel Sender Unit
- Item Dimensions: 8.3 x 10.5 x 11.1 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2013 Ford Edge Fuel Pump
Vehicle Fitment- 2013 Ford Edge | Limited, SE, SEL, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
$84.47 MSRP:$139.64You Save: $55.17 (40%)
Autobest® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: F1589AProduct Specifications- Notes: Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir and Fuel Strainer,FWD
- Average Current Draw(A): 8
- Average Flow Rating(GPH): 42.3
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: FKM
- Grade Type: Regular
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 65
- Minimum Pump Pressure (PSI): 55
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 8.74
- Product Length (in): 9.72
- Product Width (in): 9.13
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 180
- Resistance Ohms Full: 10
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845115898
- Voltage: 12V
- Weight (lbs): 2.71
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
$106.21
Delphi® Driver Side Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: FG1758Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 10
- Flow Rating: 51 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Lock Ring Included: No
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 2
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604241752
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2013 Ford Edge Driver Side Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
Airtex® Direct Injection High Pressure Fuel Pump for 2013 Ford Edge
PartNumber: D20012Product Specifications- Gasket or Seal Included: Yes
- Housing Material: Cast / Steel
- Inlet Outside Diameter: 7.9
- Inlet Type: Quick Connect
- Internal or External: External
- Mounting Hardware Included: No
- Muffler Outlet Diameter (in): 13.8
- Outlet Type: Threaded
- Pump Type: Mechanical
- UPC: 889464032068
- Part Description: 2013 Ford Edge Direct Injection High Pressure Fuel Pump
Vehicle Fitment- 2013 Ford Edge | All Trims | 4 Cyl 2.0L
Airtex® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: E2578MProduct Specifications- Gasket or Seal Included: No
- Inlet Count: 1
- Inlet Type: STRAINER
- Internal or External: Internal
- Item Grade: STANDARD REPLACEMENT
- Maximum Free Flow Rate (gph): 70
- Maximum Pressure (psi): 65
- Minimum Free Flow Rate (gph): 60
- Minimum Pressure (psi): 58.0
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: QUICK CONNECT
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Pump Type: Electrical
- UPC: 080044053422
- Voltage [V]: 12V
- Wiring Harness Included: No
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
Autobest® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: F1502AProduct Specifications- Notes: Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
- Average Current Draw(A): 11.5
- Average Flow Rating(GPH): 45.7
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangle
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.465
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 110
- Minimum Pump Pressure (PSI): 100
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 6.36
- Product Length (in): 9.74
- Product Width (in): 8.15
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 17
- Resistance Ohms Full: 188
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845115027
- Voltage: 12V
- Weight (lbs): 2.63
- Wire Harness Included: No
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 4 Cyl 2.0L
Airtex® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: E2579MProduct Specifications- Gasket or Seal Included: No
- Inlet Count: 1
- Inlet Type: STRAINER
- Internal or External: Internal
- Item Grade: STANDARD REPLACEMENT
- Maximum Free Flow Rate (gph): 70
- Maximum Pressure (psi): 60
- Minimum Free Flow Rate (gph): 60
- Minimum Pressure (psi): 55.0
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: QUICK CONNECT
- Package Contents: PUMP & KIT
- Package Quantity: 1
- Pump Type: Electrical
- UPC: 080044053453
- Voltage [V]: 12V
- Wiring Harness Included: No
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
Autobest® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: F1580AProduct Specifications- Notes: Left Side;Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir and Fuel Strainer,AWD
- Average Current Draw(A): 8
- Average Flow Rating(GPH): 41
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Trapezoid
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: FKM
- Grade Type: Regular
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 60
- Minimum Pump Pressure (PSI): 55
- Mounting Hardware Included: No
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 3/8
- Outlet Type: Quick Connect
- Product Height (in): 8.74
- Product Length (in): 9.72
- Product Width (in): 8.74
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 180
- Resistance Ohms Full: 10
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845115805
- Voltage: 12V
- Weight (lbs): 2.73
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 6 Cyl 3.5L
- 2013 Ford Edge | All Trims | 6 Cyl 3.7L
Delphi® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: FG1677Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Average Current Draw: 10
- Average Flow Rating: 55
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Lock Ring Included: No
- Maximum Pressure: 138.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Outlet Type: Quick Connect
- Package Contents: Fuel Pump Module Assembly w/Float Arm, Instruction Sheet
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 65 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604241905
- Vapor Pressure Sensor: No
- Voltage: 12.0
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 4 Cyl 2.0L
Airtex® Fuel Pump Module Assembly for 2013 Ford Edge
PartNumber: E2591MProduct Specifications- Notes: Includes Fuel Pump, Fuel Pressure Reg, Sending Unit, Float, Fuel Reservoir & Fuel Strainer
- Gasket Included: N
- Inlet Count: 1
- Inlet Type: STRAINER
- Item Grade: STANDARD REPLACEMENT
- Maximum Free Flow Rate (gph): 80
- Maximum Pressure Rate (psi): 110
- Minimum Free Flow Rate (gph): 70
- Minimum Pressure Rate (psi): 100
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: QUICK CONNECT
- Package Contents: PUMP & KIT
- Package Quantity: 1
- UPC: 080044063032
- Part Description: 2013 Ford Edge Fuel Pump Module Assembly
Vehicle Fitment- 2013 Ford Edge | All Trims | 4 Cyl 2.0L
Delphi® Mechanical Fuel Pump for 2013 Ford Edge
PartNumber: HM10004Product Specifications- Drive Shaft Included: No
- Fuel Type: Gas
- Gasket or Seal Included: No
- Housing Color: Silver
- Housing Material: Metal
- In Tank or External: External
- Inlet Outside Diameter: 0.313
- Inlet Type: Quick Connect
- Item Grade: Standard Replacement
- Mounting Hardware Included: No
- Outlet Fitting Thread Size: M14-1.5
- Outlet Quantity: 2
- Outlet Type: Threaded
- Package Contents: Direct Injection High Pressure Fuel Pump, Instruction Sheet
- Pump Type: Mechanical
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 689604265222
- Wiring Harness Included: No
- Part Description: 2013 Ford Edge Mechanical Fuel Pump
Vehicle Fitment- 2013 Ford Edge | All Trims | 4 Cyl 2.0L