< Back ×
My Vehicle Change Vehicle
2011 Chevrolet HHR
< Back to View All
Alternators, Batteries & Starters
- Department
- Prices
OEM (Genuine) 2011 Chevrolet HHR Support Asm-Battery Tray
PartNumber: 15776722
Product Specifications- Other Names: Battery Tray
- Item Dimensions: 7.2 x 17.6 x 13.5 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Chevrolet HHR Support Asm-Battery Tray
Vehicle Fitment- 2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$23.65 MSRP:$47.72You Save: $24.07 (51%)
FAQ for Battery Trays Repair
Q: What is the installation procedure?
A:
Drill 8 mm plug weld holes in the service part as necessary in the locations noted from the original panel. Apply 3M Weld-Thru coating P/N 05916. Position the battery tray on the vehicle. Plug weld accordingly. Clean and prepare all of the welded surfaces. Install all of the related panels and components. Apply the sealers and paint the required area. Connect the negative battery table. Enable the SIR system.
By Omar
GM Specialist
08/11/2021Q: What is the procedure for Battery Tray Replacement?
A:
Disable the SIR SYSTEM. Disconnect the negative battery cable. Remove all related panels and components. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Locate and drill out all the necessary factory welds. Heat the battery tray at the locations shown with a small flame from an oxy-acetylene torch to release the bond to the rear floor panel. Remove the batter tray.
By Bob
GM Specialist
08/11/2021