< Back ×
My Vehicle Change Vehicle
2011 Chevrolet HHR
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2011 Chevrolet HHR Passenger Discriminating Sensor
PartNumber: 15821097
Product Specifications- Item Dimensions: 3.3 x 2.1 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Chevrolet HHR Passenger Discriminating Sensor
Vehicle Fitment- 2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$238.31 MSRP:$359.52You Save: $121.21 (34%)
OEM (Genuine) 2011 Chevrolet HHR Side Sensor
PartNumber: 15821098
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 2.1 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2011 Chevrolet HHR Side Sensor
Vehicle Fitment- 2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$169.49 MSRP:$255.70You Save: $86.21 (34%)
FAQ for Air Bag Sensor Repair
Q: What if the airbag readiness light flashes for a few seconds, and then turns off?
A:
If the airbag readiness light flashes for a few seconds when the engine is started and then turns off, refer to SDM Programming in this bulletin. Submit a claim using the published labor operation code provided in this field action bulletin.
By Bob
GM Specialist
08/11/2021Q: When should this service procedure be completed?
A:
This service vehicle should be completed as soon as possible on involved vehicles currently in dealer inventory and customer vehicles that return to the dealer for any type of service during the New Vehicle Limited Warranty coverage period.
By Bob
GM Specialist
08/11/2021Q: What are the steps for SDM programming?
A:
First, verify that there is a battery charge of 12 to 15 volts. Only use an approved Midtronics(R) PSC 550 Battery maintainer. Connect the MDI to the vehicle. Select J2534 MDI and Reprogram ECU from the Select Diagnosis Tool and Programming process screen. Select SDM Sensing and Diagnostic Module from the Supported Controllers screen. Follow the on-screen instructions.
By Omar
GM Specialist
08/11/2021Q: What is the service procedure?
A:
First, determine if the airbag readiness light stays on. The airbag readiness light should flash for a few seconds when the engine is started and then turn off.
By Omar
GM Specialist
08/11/2021