< Back ×
My Vehicle Change Vehicle
2011 Chevrolet Express 1500
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2011 Chevrolet Express 1500 Track Bracket
PartNumber: 20814567
Product Specifications- Notes: Sliding Type, Center
- Other Names: Roller Bracket, Track Bracket
- Item Dimensions: 4.3 x 4.4 x 12.4 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15223477, 15837338, 15742657, 15762387
- Part Description: 2011 Chevrolet Express 1500 Track Bracket
Vehicle Fitment- 2011 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
$155.41 MSRP:$234.46You Save: $79.05 (34%)
OEM (Genuine) 2011 Chevrolet Express 1500 Track Bracket
PartNumber: 20814566
Product Specifications- Notes: Sliding Type, Lower
- Other Names: Roller Bracket, Track Bracket
- Item Dimensions: 8.3 x 8.2 x 3.1 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15223478, 15837339, 15742658
- Part Description: 2011 Chevrolet Express 1500 Track Bracket
Vehicle Fitment- 2011 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
$212.43 MSRP:$320.48You Save: $108.05 (34%)
OEM (Genuine) 2011 Chevrolet Express 1500 Track Bracket
PartNumber: 15837340
Product Specifications- Notes: Sliding Type, Upper
- Other Names: Roller Bracket, Track Bracket
- Item Dimensions: 9.6 x 12.3 x 1.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15223479, 15742656
- Part Description: 2011 Chevrolet Express 1500 Track Bracket
Vehicle Fitment- 2011 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
$88.45 MSRP:$133.44You Save: $44.99 (34%)
FAQ for Sliding Door Roller Repair
Q: How do you install the rear side door upper roller bracket garnish molding?
A:
You can install the rear side door roller bracket garnish molding by installing the upper roller bracket cover and aligning the roller bracket cover into position with retainers.
By Bob
GM Specialist
10/12/2021Q: How do you install the rear side door lower roller bracket?
A:
To install the rear side door lower roller bracket you have to install the roller bracket into the vehicle and track. Finally, install the bolts that hold the roller bracket in place.
By Bob
GM Specialist
29/11/2021Q: What is the proper way to remove the Rear side door roller bracket?
A:
The proper way to remove the rear side door roller bracket is to remove the following: remove the door trim panel, remove the bolts and nuts, slide the rear side roller bracket from the rear and remove the roller bracket from the vehicle.
By Bob
GM Specialist
29/11/2021Q: What is the proper way to install the rear side door upper roller bracket?
A:
The proper way to install the rear side door upper roller bracket is to install the roller bracket to the vehicle, install the bolts to hold the upper roller bracket, the upper track garnish molding, and the upper bracket cover.
By Bob
GM Specialist
29/11/2021Q: What is the installation procedure for the rear side door roller bracket?
A:
The installation procedure for the rear side door roller bracket is to install the roller bracket, slide the roller bracket from the rear of the track, and install the nuts and bolts. Finally, install the sliding door trim panel and close the door.
By Omar
GM Specialist
29/11/2021Q: What is the removal procedure for the rear side door lower roller bracket?
A:
The removal procedure for the rear side door lower roller bracket is to remove the bolts that hold the roller bracket and remove the lower roller bracket from the track and the roller bracket from the vehicle.
By Omar
GM Specialist
28/11/2021Q: What is the removal procedure for the rear side door upper garnish molding?
A:
The removal procedure for the rear side garnish molding is to gently pull the upper roller bracket cover and remove the retaining clips.
By Omar
GM Specialist
27/11/2021Q: What is the removal procedure for the rear side door upper roller bracket?
A:
The removal procedure for the rear side door upper roller bracket is to remove the following: the sliding door upper roller bracket, the upper track garnish molding, and the bolts.
By Bob
GM Specialist
27/11/2021See more FAQs (3)