FAQ for Door Hinge Repair
Q: How do you remove the intermediate side door hinge?
A:
You can remove the intermediate side door hinge by removing the door that needs the hinge replaced, the interior trim at the pillar, and cutting the side door hinge.
By BobGM Specialist
08/12/2021 Q: What is the front side door hinge pin and bushing removal process?
A:
First, remove the hinge pin retainers from the hinge pins, then grasp the lower hinge pin with a pair of locking pliers. Install a bolt through the lower hinges, and remove the bolt from the lower hinge pinhole. Remove the door from the vehicle.
By BobGM Specialist
29/11/2021 Q: What is the proper way to remove the rear door hinge pin?
A:
The proper way to remove the rear door hinge pin is to unhook the door link, disconnect the electrical connectors and remove the following: the upper hinge pin on the cargo door, the lower hinge pin, and the door from the vehicle and do the same for the opposite door.
By BobGM Specialist
29/11/2021 Q: How do you remove the rear door hinge?
A:
You remove the rear door hinge by removing the door from the vehicle, removing the sealer, marking the locations, and removing the hinges from the door.
By OmarGM Specialist
29/11/2021 Q: What is the installation procedure for the rear door hinge pin?
A:
The installation procedure for the rear door hinge pin is to apply oil on the new hinge pin and install them into the body, install the grease fitting, the door to the vehicle and the upper hinge as well as the lower hinge pin, and connect the electrical connectors.
By OmarGM Specialist
29/11/2021 Q: What is the front side door hinge and bushing installation procedure?
A:
Install the lower hinge pin bushings to install bushings to the body. Install the upper hinge pin bushings to install bushings to the door. Install a bolt through the lower hinges to temporarily hold the door in place. Remove the temporary bolt from the lower hinge, and install the hinge pin retainers to the hinge pins.
By OmarGM Specialist
29/11/2021 Q: What is the installation procedure for the rear door hinge?
A:
The installation procedure for the rear door hinge is to deburr the holes on the door to ensure proper seating, position bolts on marked locations, and install the hinge and door to the body.
By BobGM Specialist
29/11/2021 Q: What is the installation procedure for the rear-side access door hinge?
A:
The installation procedure for the rear side access door is to install the hinge to the body and door, loosely install the screw and align the door.
By OmarGM Specialist
29/11/2021 Q: What is the proper way to install the intermediate side door hinge?
A:
The proper way to install the intermediate side door hinge is to Install the service hinge and back plating, install the door and interior trim.
By OmarGM Specialist
28/11/2021 Q: What is the removal procedure for the rear side access door hinge?
A:
The removal procedure for the rear side access door hinge is to remove the screws and hinge from the body.
By OmarGM Specialist
28/11/2021 See more FAQs (5)