< Back ×
My Vehicle Change Vehicle
2011 Chevrolet Express 1500
< Back to View All
Quarter Panels
- Department
- Prices
OEM (Genuine) 2011 Chevrolet Express 1500 Splash Shield
PartNumber: 23507604
Product Specifications- Location: Driver Side
- Other Names: Splash Shield
- Item Dimensions: 6.6 x 4.3 x 12.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15203936, 15178089
- Part Description: 2011 Chevrolet Express 1500 Splash Shield
Vehicle Fitment- 2011 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$32.65 MSRP:$49.28You Save: $16.63 (34%)OEM (Genuine) 2011 Chevrolet Express 1500 Splash Shield
PartNumber: 15203937
Product Specifications- Location: Passenger Side
- Other Names: Splash Shield
- Item Dimensions: 6.4 x 4.4 x 12.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15178090
- Part Description: 2011 Chevrolet Express 1500 Splash Shield
Vehicle Fitment- 2011 Chevrolet Express 1500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$31.32 MSRP:$47.26You Save: $15.94 (34%)
FAQ for Fender Splash Shield Repair
Q: What is the proper way to install the wheelhouse splash shield?
A:
The proper way is to install the splash shields, the bolts, the push-pin retainers, and the passenger side tire.
By Omar
GM Specialist
29/11/2021Q: What is the proper way to remove the wheelhouse splash shield?
A:
The proper way is to remove the front passenger tire, the push pin retainers, the bolts, and the splash shield.
By Bob
GM Specialist
29/11/2021Q: What is the front fender replacement removal procedure?
A:
Apply tape to the panels to be removed and remove the right and the left air inlet grille panels from the vehicle. Remove the hood from the vehicle and remove the upper fender filler panel from the vehicle.
By Omar
GM Specialist
29/11/2021Q: What is the front fender extension replacement removal procedure?
A:
Remove the bolt retaining the front fender extension to the body and remove the bolt retaining the front fender extension to the rocker panel. Finally, remove the front fender extension from the body.
By Omar
GM Specialist
29/11/2021Q: What is the front fender replacement installation procedure?
A:
Install the bolts retaining the front fender to the body and tighten them. Install the hood rod support to the left fender, and install the new rivets. After that install the bumper, the front fender extension, and the upper fender filler panel. Finally, install the hood and the right/left air inlet grille panels to the vehicle.
By Bob
GM Specialist
29/11/2021Q: What is the front fender extension replacement installation procedure?
A:
Install the front fender extension to the body, install the bolts retaining the front fender extension to the body and tighten to 11Nm. Install the bolt retaining the front fender extension to the rocker panel and tighten it to 2Nm.
By Bob
GM Specialist
28/11/2021Q: What is the upper front fender filler panel replacement installation procedure?
A:
Install the upper fender filler panel to the vehicle and install the upper fender filler panel under the windshield molding. After that install the upper fender filler panel onto the retaining clips, and install the bolt to retain the upper fender filler panel to the body and tighten to 2 Nm. Install the upper fender filler panel applique.
By Omar
GM Specialist
27/11/2021Q: What is the upper front fender filler panel replacement removal procedure?
A:
Remove the upper fender filler panel applique, and remove the bolt retaining the upper filler panel to the body. Remove the upper filler panel from the retaining clips, and remove the upper filler panel from the vehicle.
By Bob
GM Specialist
26/11/2021See more FAQs (3)