< Back ×
My Vehicle Change Vehicle
2010 Jeep Commander
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Delphi® Fuel Pump Module Assembly for 2010 Jeep Commander
PartNumber: FG0843Product Specifications- Notes: Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Current Draw: 12
- Flow Rating: 48 gph
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Gasket or Seal Included: Yes
- In Tank or External: In Tank
- Inlet Type: Strainer
- Internal or External Strainer: Internal
- Item Grade: Standard Replacement
- Maximum Pressure: 78.0 PSI
- Outlet Outside Diameter: 0.375''
- Outlet Quantity: 1
- Outlet Type: Quick Connect
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 22.0
- Resistance Ohms Full: 990.0
- Strainer Included: Yes
- System Pressure: 58 psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- UPC: 689604202098
- Vapor Pressure Sensor: No
- Voltage: 12.0 VDC
- Part Description: 2010 Jeep Commander Fuel Pump Module Assembly
Vehicle Fitment- 2010 Jeep Commander | All Trims | All Engines
$206.80
Autobest® Fuel Pump Module Assembly for 2010 Jeep Commander
PartNumber: F3108AProduct Specifications- Notes: Includes Fuel Pump, Fuel Pressure Regulator, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
- Average Current Draw(A): 12.9
- Average Flow Rating(GPH): 44.7
- Connector Gender: Male
- Connector Quantity: 1
- Connector Shape: Rectangle
- Country of Orign: China
- Fuel Filter Included: Yes
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Gasket or Seal Included: Yes
- Gasket Or Seal Material: NBR
- Grade Type: Performance
- Housing Material: POM
- In Tank or External: In Tank
- Inlet Size: 0.314
- Inlet Type: Strainer
- Installation Warnings: No
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 62.35
- Minimum Pump Pressure (PSI): 59.45
- Negative Ground: Yes
- Outlet Quantity: 1
- Outlet Size: 0.374
- Outlet Type: Quick Connect
- Product Height (in): 6.38
- Product Length (in): 12.09
- Product Width (in): 10.87
- Pump Type: Turbine
- Regulator Included: Yes
- Resistance Ohms Empty: 20
- Resistance Ohms Full: 990
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: PIN
- UPC: 00072845131089
- Voltage: 12V
- Weight (lbs): 3.01
- Wire Harness Included: No
- Part Description: 2010 Jeep Commander Fuel Pump Module Assembly
Vehicle Fitment- 2010 Jeep Commander | All Trims | 6 Cyl 3.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 5.7L
$90.63
Autobest® Fuel Pump and Strainer Set for 2010 Jeep Commander
PartNumber: F3217Product Specifications- Notes: Includes Tank Seal and Fuel Strainer
- Average Current Draw(A): 10
- Average Flow Rating(GPH): 220
- Country of Orign: China
- Gasket or Seal Included: No
- In Tank or External: In Tank
- Inlet Size: 0.433
- Inlet Type: Strainer
- Installation Warnings: No
- Lock Ring Included: No
- Maximum Pump Pressure (PSI): 130.5
- Minimum Pump Pressure (PSI): 87
- Negative Ground: No
- Outlet Quantity: 1
- Outlet Size: 0.346
- Outlet Type: Hose
- Product Height (in): 1.54
- Product Length (in): 5.04
- Product Width (in): 1.54
- Pump Type: Turbine
- Regulator Included: No
- Strainer Included: No
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Chip
- UPC: 00072845132178
- Voltage: 12V
- Weight (lbs): 0.84
- Wire Harness Included: No
- Part Description: 2010 Jeep Commander Fuel Pump and Strainer Set
Vehicle Fitment- 2010 Jeep Commander | All Trims | 6 Cyl 3.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 5.7L
$41.69
OEM (Genuine) 2010 Jeep Commander Module-Fuel Pump/Level Unit
PartNumber: 5143579AQ
Product Specifications- Other Names: Fuel Pump, Fuel Pump Assembly
- Item Dimensions: 7.4 x 12.8 x 19.0 inches
- Item Weight: 3.60 Pounds
- Replaces: 5143579AJ, 68024558AA, 5143579AF, 5143579AI, 5143579AM, 5143579AN, 5143579AD, 5143579AH, 5143579AK, 5143579AC, 5143579AE, 5143579AP, RL143579AK, 5143579AL, RL143579AL
- Part Description: 2010 Jeep Commander Module-Fuel Pump/Level Unit
Vehicle Fitment- 2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
$382.79 MSRP:$585.00You Save: $202.21 (35%)
Airtex® In-Tank Fuel Pump Module Assembly for 2010 Jeep Commander
PartNumber: E7197MProduct Specifications- Gasket Included: N
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Strainer
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 90
- Maximum Pressure Rate (psi): 60
- Minimum Free Flow Rate (gph): 80
- Minimum Pressure Rate (psi): 60
- Outlet Count: 1
- Outlet Size: 3/8"
- Outlet Type: Quick Connect
- Package Contents: Pump & Kit
- Package Quantity: 1
- UPC: 080044013129
- Warranty: Lifetime Limited Warranty
- Part Description: 2010 Jeep Commander In-Tank Fuel Pump Module Assembly
Vehicle Fitment- 2010 Jeep Commander | All Trims | 6 Cyl 3.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 4.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 5.7L
Airtex® In-Tank Fuel Pump and Strainer Set for 2010 Jeep Commander
PartNumber: E7206Product Specifications- Gasket Included: Y
- Hazardous Material: No
- Inlet Count: 1
- Inlet Type: Strainer
- Item Grade: Standard Replacement
- Maximum Free Flow Rate (gph): 95
- Maximum Pressure Rate (psi): 120
- Minimum Free Flow Rate (gph): 90
- Minimum Pressure Rate (psi): 110
- Outlet Count: 1
- Outlet Size: 5/16
- Outlet Type: Barbed
- Package Contents: Pump & Kit
- Package Quantity: 1
- UPC: 080044016335
- Warranty: Lifetime Limited Warranty
- Part Description: 2010 Jeep Commander In-Tank Fuel Pump and Strainer Set
Vehicle Fitment- 2010 Jeep Commander | All Trims | 6 Cyl 3.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 4.7L
- 2010 Jeep Commander | All Trims | 8 Cyl 5.7L