< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Prices
OEM (Genuine) 2010 GMC Yukon Valve Springs
PartNumber: 12482062
Product Specifications- Notes: Tahoe, Yukon, Escalade; Exhaust
- Other Names: Valve Seal, Valve Spring
- Item Dimensions: 4.4 x 2.8 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Yukon Valve Springs
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$39.90 MSRP:$66.04You Save: $26.14 (40%)OEM (Genuine) 2010 GMC Yukon Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Tahoe, Yukon, Escalade; Non-Active Fuel Management; Tahoe, Yukon, Escalade; W/O Active Fuel Mgmt.
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2010 GMC Yukon Valve Lifters
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$36.57 MSRP:$60.54You Save: $23.97 (40%)OEM (Genuine) 2010 GMC Yukon Valve Springs
PartNumber: 12706568
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Valve Spring
- Item Dimensions: 3.6 x 3.2 x 2.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12589774, 12553696
- Part Description: 2010 GMC Yukon Valve Springs
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$4.66 MSRP:$7.39You Save: $2.73 (37%)
FAQ for Valve Spring Repair
Q: How to install the Valve Stem Oil Seal and Valve Spring?
A:
You can lubricate the valve guide and valve stem oil seal with clean engine oil, install the valve spring cap, the valve spring, the valve stem oil seal, and the valve, compress the valve spring, install the valve keys, remove the J 22794 from the spark plug port, hand start the spark plug, install the spark plug wires at the ignition coil, the spark plug wire to the spark plug, the rocker arm.
By Bob
GM Specialist
02/11/2022Q: How to remove the Valve Stem Oil Seal and Valve Spring?
A:
You can remove the rocker arm, disconnect the spark plug wire at the spark plug, brush or air blast away any dirt or debris from around the spark plug, remove the spark plug, install the J 22794 into the spark plug hole, attach an air hose to the J 22794, apply compressed air to the J 22794 to hold the valves in place, compress the valve spring, remove the valve stem keys, release the valve spring tension, remove the J 38606, remove the valve spring cap, the valve spring, the valve stem oil seal, the valve.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the spark plug?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What should I notice for Valve Springs?
A:
Valve springs can be tightly compressed. You should use care when removing retainers and plugs. Personal injury could result.
By Bob
GM Specialist
02/11/2022