< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Yukon Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Tahoe, Yukon, Escalade; Non-Active Fuel Management; Tahoe, Yukon, Escalade; W/O Active Fuel Mgmt.
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2010 GMC Yukon Valve Lifters
Vehicle Fitment- 2010 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$36.57 MSRP:$60.54You Save: $23.97 (40%)OEM (Genuine) 2010 GMC Yukon LIFTER ASM-VLV (AFM)
PartNumber: 12680871
Product Specifications- Other Names: Valve Lifters
- Item Dimensions: 4.0 x 2.1 x 2.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12698946
- Part Description: 2010 GMC Yukon LIFTER ASM-VLV (AFM)
Vehicle Fitment- 2010 GMC Yukon | AT4, Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$45.80 MSRP:$79.72You Save: $33.92 (43%)
Sealed Power® Valve Lifter for 2010 GMC Yukon
PartNumber: HT-2303Product Specifications- Notes: Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 614046896635
- Part Description: 2010 GMC Yukon Valve Lifter
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.0L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
$41.69
Sealed Power® Hydraulic Roller Valve Lifter for 2010 GMC Yukon
PartNumber: HT-2148Product Specifications- Notes: Hydraulic Roller Lifters;Active Fuel Management Engine;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- UPC: 724956564873
- Part Description: 2010 GMC Yukon Hydraulic Roller Valve Lifter
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.0L
Sealed Power® Engine Valve Lifter for 2010 GMC Yukon
PartNumber: HT-2148BProduct Specifications- Notes: Active Fuel Management Engine;Box of 128;Bulk Pack;Hydraulic Roller Lifters;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7;Non Active Fuel Management Eng
- Note: O.E. Replacement
- Package Alert: Carton of 128
- UPC: 724956696369
- Part Description: 2010 GMC Yukon Engine Valve Lifter
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.0L
Sealed Power® Valve Lifter for 2010 GMC Yukon
PartNumber: HT-2303BProduct Specifications- Notes: Bulk Pack;Box of 50;Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 019826234780
- Part Description: 2010 GMC Yukon Valve Lifter
Vehicle Fitment- 2010 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.0L
- 2010 GMC Yukon | All Trims | 8 Cyl 6.2L
FAQ for Valve Lifter Repair
Q: How to remove the Valve Lifter Oil Filter?
A:
You can remove the intake manifold, disconnect the engine harness electrical connector, remove the oil pressure sensor and washer, remove and discard the valve lifter oil filter, and remove and discard the valve lifter oil filter O-ring seal.
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Lifter?
A:
You can install the cylinder head and gasket, the valve lifter guide bolts, the valve lifter guides, and the valve lifters.
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Lifter Oil Filter?
A:
You can install a valve lifter oil filter O-ring seal into the valve lifter oil manifold, a valve lifter oil filter, apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the oil pressure sensor, install the oil pressure sensor washer and sensor, the oil pressure sensor washer, and sensor, connect the engine harness electrical connector to the oil pressure sensor, install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the sensor?
A:
The recommended torque is 35 Nm (26 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the valve lifter guide bolts?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
02/11/2022Q: How to install the Valve Lifter Oil Manifold?
A:
You can place the service gasket onto the valve lifter oil manifold, install the valve lifter oil manifold and the valve lifter oil manifold bolts, connect the engine harness electrical connector to the oil pressure sensor, and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: How to remove the Valve Lifter Oil Manifold?
A:
You can remove the intake manifold, disconnect the engine harness electrical connector from the oil pressure sensor, do not lift the valve lifter oil manifold by the electrical lead frame, remove the valve lifter oil manifold bolts, the valve lifter oil manifold, identify the 8 gasket retaining strap locations, cut the 8 retaining straps, remove the outer gasket from the valve lifter oil manifold.
By Bob
GM Specialist
02/11/2022Q: How to remove the Valve Lifter?
A:
You can remove the cylinder head and gasket, the valve lifter guide bolts, the valve lifter guides, and the valve lifters.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the valve lifter oil manifold bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (4)