Notes: Includes: Gasket; Grade: Actual OE; Terminal Quantity: 6; Availability: Available to Order; Bore Dia: 87.0; Gasket Or Seal Included: Yes; Idle Air Control Motor Included: No; Throttle Body Type: Electric; Throttle Position Sensor Included: Yes
Actuation Type: Electric
Bore Diameter: 87.0 mm
Gasket or Seal Included: Yes
Hardware Included: No
Idle Air Control Motor Included: No
Manufacturer: Hitachi
New or Remanufactured: New
OE Part Number: 12629992
Qty Needed Per Unit: 1
Terminal Connector Type: Blade
Terminal Gender: Male
Terminal Quantity: 6
Throttle Body Type: Electric
Throttle Position Sensor Included: Yes
UPC: 840151060290
Part Description: 2010 GMC Sierra 3500 HD Fuel Injection Throttle Body
Part Description: 2010 GMC Sierra 3500 HD Throttle Body
More Info
Vehicle Fitment
2010 GMC Sierra 3500 HD | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
$108.59MSRP: $179.75
You Save: $71.16 (40%)
FAQ for Throttle Body Repair
Q: How to install the Throttle Body Assembly?
A:
You should install a new throttle body gasket to the intake manifold, install the throttle body, bolts and nuts, install the air cleaner outlet duct and then connect a scan tool to test for proper throttle-opening and throttle-closing range.
By Bob
GM Specialist
02/11/2022
Q: How to clean the Throttle Body?
A:
You should remove the air cleaner outlet duct, inspect the throttle body bore and the throttle plate for deposits, clean the throttle body bore and the throttle plate, install the air cleaner outlet duct and then perform the Throttle Learn Procedure.
By Bob
GM Specialist
02/11/2022
Q: How to remove the Throttle Body Assembly?
A:
You should remove the air cleaner outlet duct, the throttle body nuts and bolts, the throttle body, and the throttle body gasket.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: How to remove the Manifold Absolute Pressure Sensor?
A:
You should remove the intake manifold sight shield, disconnect the engine wiring harness electrical connector from the manifold absolute pressure (MAP) sensor, remove the MAP Sensor retainer and then remove the MAP sensor.
Q: How to install the Upper Intake Manifold Cover?
A:
You should install the upper Intake Manifold cover, the upper intake manifold cover nut until snug, the brake booster vacuum hose to the intake manifold nipple, and the intake manifold.
Q: How many screws attach to the Air Cleaner Housing Cover?
A:
There are 4 screws attached to the Air Cleaner Housing Cover.