< Back ×
My Vehicle Change Vehicle
2010 GMC Canyon
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2010 GMC Canyon Evaporator Asm, A/C
PartNumber: 89018834
Product Specifications- Notes: Canyon, Colorado
- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 16.1 x 13.3 x 9.5 inches
- Item Weight: 5.30 Pounds
- Replaces: 89018325
- Part Description: 2010 GMC Canyon Evaporator Asm, A/C
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$80.75 MSRP:$246.54You Save: $165.79 (68%)
Four Seasons® A C Evaporator Core for 2010 GMC Canyon
PartNumber: 44162Product Specifications- Notes: Evaporator replacement for this application may require considerable time, specialty tools, and training.
- Core Depth Fraction: 2-7/8
- Core Depth MM: 73
- Core Height Fraction: 8-1/16
- Core Height MM: 204.787
- Core Width Fraction: 9-7/8
- Core Width MM: 250.000
- Depth: 2.875
- Height: 8.0625
- UPC: 096361098343
- Width: 9.875
- Part Description: 2010 GMC Canyon A C Evaporator Core
Vehicle Fitment- 2010 GMC Canyon | All Trims | All Engines
$63.73
OEM (Genuine) 2010 GMC Canyon Evaporator Asm, A/C
PartNumber: 89018984
Product Specifications- Other Names: Evaporator, Evaporator Core
- Item Dimensions: 7.4 x 17.0 x 13.1 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 GMC Canyon Evaporator Asm, A/C
Vehicle Fitment- 2010 GMC Canyon | SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for A/C Evaporator Core Repair
Q: How to remove the Air Conditioning Evaporator Core?
A:
You need to remove the HVAC module assembly and remove the screws to separate the HVAC module assembly halves. Then you need to remove the evaporator temperature sensor control module screw and reposition the evaporator temperature sensor control module. After that, you need to separate the HVAC module assembly and remove the evaporator temperature sensor from the evaporator. Finally, you can remove the evaporator core from the HVAC module assembly.
By Bob
GM Specialist
28/10/2022Q: How to remove the Evaporator Air Temperature Sensor?
A:
You need to remove the radio and remove the mounting screw from the evaporator temperature control module. Then you need to disconnect the electrical connector from the control module and cut the evaporator temperature sensor wire near the control module. After that, you need to remove the evaporator core, then you can remove the evaporator temperature sensor from the evaporator core.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the evaporator temperature sensor control module screw?
A:
The recommended torque is 1.9 Nm (17 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Evaporator Air Temperature Sensor?
A:
You need to install the evaporator temperature sensor to the evaporator core and align the evaporator temperature sensor wires with the opening in the upper HVAC module case. Then you need to install the evaporator core, and cut the evaporator temperature sensor from the replacement assembly. After that, you need to connect the original sensor wire to the replacement assembly and connect the electrical connector to the evaporator temperature control module. Finally, you need to install the mounting screw to the control module and install the radio.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the mounting screw?
A:
The recommended torque is 1.9 Nm (17 lb in).
By Bob
GM Specialist
28/10/2022Q: How to install the Air Conditioning Evaporator Core?
A:
You need to install the seal between the HVAC module assembly halves and install the evaporator core to the HVAC module assembly. Then you need to install the evaporator temperature sensor to the evaporator core and assemble the HVAC module assembly. After that, you need to install the HVAC module assembly and install the evaporator temperature sensor control module screw. Finally, you need to install the HVAC module assembly.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the screws to join the HVAC module assembly halves?
A:
The recommended torque is 1.9 Nm (17 lb in).
By Bob
GM Specialist
28/10/2022See more FAQs (2)