< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Control Valve Solenoid
PartNumber: 12636175
Product Specifications- Notes: Enclave, Traverse
- Item Dimensions: 6.3 x 3.1 x 3.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12588943, 12626012, 12615613
- Part Description: 2010 Chevrolet Traverse Control Valve Solenoid
Vehicle Fitment- 2010 Chevrolet Traverse | High Country, L, LS, LT, LTZ, Premier, RS | 6 Cyl 3.6 L GAS
$52.27 MSRP:$78.01You Save: $25.74 (33%)
Dorman® OE Solutions Driver Side Variable Valve Timing Solenoid for 2010 Chevrolet Traverse
PartNumber: 917-219Product Specifications- Color: Silver/Zinc-Plated
- Components Included: VVT
- Electrical Connection Quantity: 1
- Electrical Connector Gender: Male
- Electrical Connector Terminal Quantity: 2
- Electrical Connector Terminal Type: Plug and Socket
- Electrical Connector Type: Plug and Socket
- Height: 2"
- Housing Material: Plastic
- Item Grade: Standard Replacement
- Overall Length: 5.6"
- Overall Width: 1.6"
- Plug/Connector Type: Plug and Socket
- Quantity of Wires: 2
- Shaft Diameter: 0.785"
- Solenoid Activation Type: Electromagnetic
- Solenoid Finish: Stainless Steel
- Terminal Gender: Female
- UPC: 019495448006
- Voltage: 12v
- Part Description: 2010 Chevrolet Traverse OE Solutions Driver Side Variable Valve Timing Solenoid
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$33.69
Gates® Lower Variable Valve Timing Solenoid for 2010 Chevrolet Traverse
PartNumber: VVS185Product Specifications- Activation Style: Electromagnetic
- Connector Gender: Female
- Connector Quantity: 1
- Gasket/Seal Included: No
- Height: 0.953"
- Material: Steel
- Mounting Bolt Included: No
- Overall Length: 143
- Overall Width: 0.953"
- Shaft Diameter: 20
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 770075706830
- Voltage (VAC): 12
- Part Description: 2010 Chevrolet Traverse Lower Variable Valve Timing Solenoid
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$30.77
Spectra Premium® Inner Variable Valve Timing Solenoid for 2010 Chevrolet Traverse
PartNumber: VTS1011Product Specifications- UPC: 671607567236
- Part Description: 2010 Chevrolet Traverse Inner Variable Valve Timing Solenoid
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | All Engines
$30.24
Walker Products® Variable Timing Solenoid for 2010 Chevrolet Traverse
PartNumber: 590-1021Product Specifications- Connector Color: Black
- Connector Gender: Female
- Connector Quantity: 1
- Connector Shape: Rectangular
- Housing Material: Metal
- Mounting Hole Quantity: 1
- Terminal Gender: Male
- Terminal Quantity: 2
- Terminal Type: Blade
- UPC: 724620111709
- Part Description: 2010 Chevrolet Traverse Variable Timing Solenoid
Vehicle Fitment- 2010 Chevrolet Traverse | All Trims | 6 Cyl 3.6L
$33.13
FAQ for Variable Timing Solenoid Repair
Q: How to remove the camshaft position actuator solenoid valve solenoid-bank 1 (right side) exhaust?
A:
You shall disconnect the engine wiring harness electrical connector from the bank 1 exhaust camshaft position (CMP) actuator solenoid valve, remove the CMP actuator solenoid valve bolt and valve, and inspect the CMP actuator solenoid valve seal and replace as necessary.
By Bob
GM Specialist
01/11/2022Q: How to install the camshaft position actuator solenoid valve solenoid-bank 2 (left side) intake?
A:
You shall install the CMP actuator solenoid valve and bolt, the power steering fluid reservoir bracket bolts, the radiator inlet hose to the water outlet and the engine mount strut bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the camshaft position actuator solenoid valve solenoid-bank 1 (right side) intake?
A:
You shall disconnect the engine wiring harness electrical connector from the bank 1 intake CMP actuator solenoid valve, and remove the CMP actuator solenoid valve bolt and valve.
By Bob
GM Specialist
01/11/2022Q: How to remove the camshaft position actuator solenoid valve solenoid-bank 2 (left side) intake?
A:
You shall remove the engine mount strut bracket, the radiator inlet hose from the water outlet, the power steering fluid reservoir bracket bolts, the power steering fluid reservoir bracket, and the CMP actuator solenoid valve bolt and valve.
By Bob
GM Specialist
01/11/2022Q: How to install the camshaft position actuator solenoid valve solenoid-bank 1 (right side) exhaust?
A:
You shall inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve, and connect the engine wiring harness electrical connector.
By Bob
GM Specialist
01/11/2022Q: How to install the camshaft position actuator solenoid valve solenoid-bank 1 (right side) intake?
A:
You shall inspect the CMP actuator solenoid valve seal for damage, install the CMP actuator solenoid valve, and connect the engine wiring harness electrical connector.
By Bob
GM Specialist
01/11/2022Q: How to remove the camshaft position actuator solenoid valve solenoid-bank 2 (left side) exhaust?
A:
You shall remove the engine mount strut bracket, and the CMP actuator solenoid valve bolt and valve, inspect the CMP actuator solenoid valve seal for damage, and replace it as necessary.
By Bob
GM Specialist
01/11/2022Q: How to install the camshaft position actuator solenoid valve solenoid-bank 2 (left side) exhaust?
A:
You shall install the CMP actuator solenoid valve, connect the engine wiring harness electrical connector to the bank 2 exhaust CMP actuator solenoid valve, and install the engine mount strut bracket.
By Bob
GM Specialist
01/11/2022Q: How do I install the Camshaft Position Actuator Solenoid Valve Solenoid?
A:
Before installing inspect the CMP actuator solenoid valve seal for damage, Install the CMP actuator solenoid valve and tighten the bolt to 10 Nm (89 LB IN). Connect the engine wiring harness electrical connector to the bank 1 intake CMP actuator solenoid valve.
By Bob
GM Specialist
13/03/2022Q: How do I install the left side bank 2 Camshaft Position Actuator Solenoid Valve Solenoid?
A:
Before installing inspect the CMP actuator solenoid valve seal for damage. Then install the CMP actuator solenoid valve and bolt. Connect the engine wiring harness electrical connector to the bank 2 intake CMP actuator solenoid valve, then Position and install the power steering fluid reservoir bracket. Install the radiator inlet hose to the water outlet and the engine mount strut bracket.
By Bob
GM Specialist
12/03/2022See more FAQs (9)