< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Camshaft
PartNumber: 19431713
Product Specifications- Notes: Enclave, Traverse; Intake; Right
- Other Names: Camshaft
- Replaces: 12603535, 19420582, 12603545, 12604374, 12632195, 19420031, 12625989, 12609252
- Part Description: 2010 Chevrolet Traverse Camshaft
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$221.89 MSRP:$352.31You Save: $130.42 (38%)OEM (Genuine) 2010 Chevrolet Traverse Camshaft, Exhaust
PartNumber: 12625988
Product Specifications- Notes: Enclave, Traverse; Exhaust; Right
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.4 x 3.5 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19431714
- Part Description: 2010 Chevrolet Traverse Camshaft, Exhaust
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$228.46 MSRP:$362.65You Save: $134.19 (38%)OEM (Genuine) 2010 Chevrolet Traverse CAMSHAFT ASM, EXH
PartNumber: 19420582Product Specifications- Other Names: Camshaft
- Fitment Type: Direct Replacement
- Replaced by: 19431713
- Part Description: 2010 Chevrolet Traverse CAMSHAFT ASM, EXH
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$221.89 MSRP:$352.31You Save: $130.42 (38%)OEM (Genuine) 2010 Chevrolet Traverse Camshaft Asm-Exhaust
PartNumber: 12625984
Product Specifications- Notes: Enclave, Traverse; Exhaust; Left
- Other Names: Camshaft
- Item Dimensions: 21.0 x 2.6 x 2.7 inches
- Item Weight: 5.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433783
- Part Description: 2010 Chevrolet Traverse Camshaft Asm-Exhaust
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$181.36 MSRP:$287.97You Save: $106.61 (38%)OEM (Genuine) 2010 Chevrolet Traverse Camshaft Asm-Intake
PartNumber: 12625986
Product Specifications- Notes: Enclave, Traverse; Intake; Left
- Other Names: Camshaft
- Item Dimensions: 3.3 x 3.4 x 28.6 inches
- Item Weight: 4.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12609250, 12604377, 12603544, 12632193
- Part Description: 2010 Chevrolet Traverse Camshaft Asm-Intake
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
FAQ for Camshaft Repair
Q: How to install the camshaft position actuator-bank 1 (right side) exhaust?
A:
You shall install the exhaust camshaft position actuator and the right-side secondary camshaft intermediate drive chain.
By Bob
GM Specialist
29/10/2022Q: How to install the camshaft position actuator-bank 1 (right side) intake?
A:
You shall make sure that the proper camshaft position actuator is installed, that the proper camshaft position actuator is being installed, that the proper timing mark is used, and install the right exhaust camshaft actuator.
By Bob
GM Specialist
29/10/2022Q: How to remove the camshaft position actuator-bank 1 (right side) intake?
A:
You shall remove the right exhaust camshaft actuator, the intake camshaft position actuator bolt, and the right intake camshaft position actuator.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while installing the camshaft position actuator-bank 2 (left side) intake?
A:
You shall make sure the proper camshaft position actuator is installed in the correct position, and use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
By Bob
GM Specialist
29/10/2022Q: How to remove the camshaft position actuator-bank 2 (left side) intake?
A:
You shall remove the left exhaust camshaft actuator, the intake camshaft position actuator bolt, and the left intake camshaft position actuator.
By Bob
GM Specialist
29/10/2022Q: How to remove the camshaft position actuator-bank 1 (right side) exhaust?
A:
You shall remove the right-hand secondary camshaft intermediate drive chain, the right exhaust camshaft position actuator bolt, the right exhaust camshaft position actuator, and the camshaft thrust washer, if applicable.
By Bob
GM Specialist
29/10/2022Q: What kind of tools will be required in the replacement of the camshaft position actuator-bank 2 (left side) exhaust?
A:
The tools required include EN-48313-Timing Chain Retention Tool.
By Bob
GM Specialist
29/10/2022Q: How do I install the Camshaft Position Actuator?
A:
Start with installing the exhaust camshaft position actuator and the right-side secondary camshaft intermediate drive chain.
By Omar
GM Specialist
13/03/2022Q: How do I remove the Camshaft Position Actuator Bank 1 Exhaust?
A:
Start with removing the right-hand secondary camshaft intermediate drive chain. Then use an open-end wrench on the hex cast into the camshaft to prevent engine rotation when loosening the camshaft position actuator bolt. Remove the right exhaust camshaft position actuator and the camshaft thrust washer.
By Omar
GM Specialist
12/03/2022Q: How do I remove the Camshaft Position Actuator?
A:
Start with removing the right exhaust camshaft actuator, the intake camshaft position actuator bolt, and the right intake camshaft position actuator.
By Omar
GM Specialist
12/03/2022See more FAQs (8)