< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Traverse
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Traverse Serpentine Belt
PartNumber: 12608660
Product Specifications- Other Names: Serpentine Belt
- Item Dimensions: 21.5 x 5.8 x 1.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Traverse Serpentine Belt
Vehicle Fitment- 2010 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
$37.88 MSRP:$68.61You Save: $30.73 (45%)
FAQ for Drive Belt Repair
Q: What should be noted when dressing the belt?
A:
You must not use belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt.
By Bob
GM Specialist
29/10/2022Q: What is the preliminary procedure for servicing the drive belt?
A:
You shall raise the vehicle, rotate the drive belt tensioner clockwise to release the drive belt tension, slide the drive belt off of the belt idler pulley, and slowly release the drive belt tensioner.
By Bob
GM Specialist
29/10/2022Q: What is the recommended bolt torque for the idler pulley bolt?
A:
The recommended bolt torque is 60 Nm (37 LB-FT).
By Bob
GM Specialist
06/03/2022Q: What should be done before servicing the drive belt?
A:
You will need to lift and support the vehicle. Rotate the drive belt tensioner clockwise to release the tension, and slide the belt off of the idler pulley. Then slowly release the drive belt tensioner.
By Omar
GM Specialist
04/03/2022Q: What will need to be removed before servicing the Drive Belt Tensioner?
A:
You will need to remove the right engine mount strut, bracket, and drive belt.
By Omar
GM Specialist
03/03/2022