< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Express 3500
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Express 3500 Knuckle
PartNumber: 84583305
Product Specifications- Other Names: Knuckle
- Item Dimensions: 14.8 x 12.2 x 6.4 inches
- Item Weight: 20.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85544426
- Part Description: 2010 Chevrolet Express 3500 Knuckle
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$162.90 MSRP:$269.63You Save: $106.73 (40%)
OEM (Genuine) 2010 Chevrolet Express 3500 Knuckle
PartNumber: 84583306
Product Specifications- Other Names: Knuckle
- Item Dimensions: 6.4 x 14.8 x 12.6 inches
- Item Weight: 19.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85022681
- Part Description: 2010 Chevrolet Express 3500 Knuckle
Vehicle Fitment- 2010 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$166.49 MSRP:$275.60You Save: $109.11 (40%)
FAQ for Steering Knuckle Repair
Q: What is the recommended bolt torque for the outer tie rod to the steering knuckle retaining nut?
A:
The recommended bolt torque is 63 Nm (47 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How do you install the steering knuckle?
A:
You can clean all grease and contaminants, install the steering knuckle, the lower ball joint to the steering knuckle retaining nut, the upper ball joint to the steering knuckle retaining nut, and the brake hose bracket retaining bolt to the knuckle, connect the outer tie rod to the steering knuckle, install the outer tie rod to the steering knuckle retaining nut, remove the safety stand, install the wheel hub and bearing and the tire and wheel, and then lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended bolt torque for the upper ball joint to the steering knuckle retaining nut?
A:
The recommended bolt torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the steering knuckle?
A:
The procedure is to raise and support the vehicle, remove the tire and wheel, the wheel hub and bearing and the outer tie rod to the steering knuckle retaining nut, disconnect the outer tie rod from the steering knuckle using J 24319-B, remove the brake hose bracket retaining bolt from the steering knuckle, support the lower control arm with a suitable jack, remove the upper ball joint retaining nut, disconnect the upper ball joint from the steering knuckle using the J 43631 and J 45851, remove the lower ball joint retaining nut, disconnect the lower ball joint from the steering knuckle using the J 43631 and J 45851, and then remove the steering knuckle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended bolt torque for the lower ball joint to the steering knuckle retaining nut?
A:
The recommended bolt torque is 100 Nm (74 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended bolt torque for the brake hose bracket retaining bolt to the knuckle?
A:
The recommended bolt torque is 10 Nm (88 lb in).
By Bob
GM Specialist
02/11/2022See more FAQs (1)