FAQ for Pillar Panels Repair
Q: What should be done before replacing the body rear corner trim panel-left side?
A:
You will need to remove the rear passenger seats as needed.
By BobGM Specialist
02/11/2022 Q: How do you install the center pillar upper garnish molding-right side?
A:
You can install the center pillar upper pillar garnish molding to the vehicle, align the retainers to the body and press the center pillar garnish molding, and then install the screw and the front seat belt to the front seat belt height adjuster.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the center pillar upper garnish molding-right side?
A:
The procedure is to remove the front seat belt from the front seat belt height adjuster, open the access door and remove the screw if equipped, grasp and gently pull the center pillar upper garnish molding, remove the center pillar upper pillar garnish molding from the vehicle, and then inspect the center pillar upper pillar garnish molding for broken or missing retaining clips.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the body side protector?
A:
The procedure is to remove the retainers from the body side protectors, the driver-side body side front protector from the vehicle, the driver-side body side rear protector from the vehicle, and the driver-side body side rear protector from the vehicle.
By BobGM Specialist
02/11/2022 Q: How do you assemble the body side rear trim panel?
A:
You can grasp and gently pull the body side rear trim panel assembly to disengage the integral clips, and then guide the seat belt through the opening in the trim panel.
By BobGM Specialist
02/11/2022 Q: What should be done before replacing the body side rear trim panel?
A:
You will need to remove the rear passenger seats as needed.
By BobGM Specialist
02/11/2022 Q: How do you install the body side protector?
A:
You can install the passenger side body side protector to the vehicle, the passenger side body side protector to the vehicle, the driver side body side front protector to the vehicle, and the retainers to the body side protectors.
By BobGM Specialist
02/11/2022 Q: How do you assemble the body rear corner trim panel?
A:
You can grasp and gently pull the body rear corner trim panel assembly to disengage the integral clips.
By BobGM Specialist
02/11/2022 Q: What is the installation procedure for the front door trim plate?
A:
The procedure is to install the front door trim plate to the front door trim panel, connect the electrical connectors to the switches, align the retainers on the front door trim plate to the slots in the front door trim panel, push towards the door panel, and then install the screws, the inside door handle bezel and the window regulator handle.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear side 60/40 door trim panel-right side (E24, 60 door)?
A:
The procedure is to remove the rear side door trim plate, the side door pull handle screws, and the side door pull handle, disengage the retainers around the outside edges of the lower portion of the door trim panel, pull the door trim panel out of the retainers around the window opening, and then remove the door panel from the vehicle.
By BobGM Specialist
01/11/2022 See more FAQs (36)