Part Description: 2010 Chevrolet Colorado Stabilizer Link
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Stabilizer Link
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Stabilizer Link
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Link Asm-Rear Stabilizer Shaft
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Premium™ Sway Bar Link
Vehicle Fitment
2010 Chevrolet Colorado | All Trims | All Engines
FAQ for Sway Bar Link Repair
Q: Is the vehicle lifted when removing the Stabilizer Shaft Link (ZQ8, Z85)?
A:
Yes, you need to raise and support the vehicle.
By Omar
GM Specialist
20/03/2022
Q: What do you need to notice when removing the link nut at the stabilizer shaft?
A:
You need to use the proper size wrench to hold the link ball stud.
By Omar
GM Specialist
20/03/2022
Q: What is the recommended torque for the link nut?
A:
The recommended torque is 44 Nm (32 lb-ft).
By Bob
GM Specialist
18/03/2022
FAQ for Other Repair Info
Q: How do you install the Lower Control Arm Ball Joint?
A:
You need to install the Ball Joint to the lower control arm, the new ball joint nuts and bolts, and the steering knuckle, and finally verify the wheel alignment.
Q: What should you do when the brake caliper is separated from its mount and the hydraulic flexible brake hose is still connected?
A:
Support the Brake Caliper with heavy mechanic wire, or equivalent.
Q: What should you pay attention to when servicing the shock absorber?
A:
You need to ensure that the service replacement Shock Absorbers must be equivalent to the original shock absorbers in both extended length and strength.