2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: without 18 in Wheels;Recommended OE Application -Specific Replacement;Includes Strut, Strut Mount and Coil Spring;Assembled in the USA;without 17 in Wheels
Body Length: 10.54"
Compressed Bumper Stop: No
Compressed Length: 11.04"
Dust Shield: Yes
Extended Bumper Stop: No
Extended Hydraulic Lockout: No
Extended Length: 15.81"
Stroke Length: 4.77"
UPC: 048598575609
Part Description: 2010 Chevrolet Colorado Quick-Strut™ Front Driver or Passenger Side Complete Strut Assembly
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Front Shock Absorber Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
FAQ for Shock Absorber Repair
Q: What is the recommended torque for the absorber retaining nut?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
18/03/2022
Q: What kind of special tools will be used in the removal procedure for the Shock Absorber (2WD, Z85, ZQ8)?
A:
J45400 Strut Spring Compressor.
By Bob
GM Specialist
17/03/2022
Q: What should you pay attention to when servicing the shock absorber?
A:
You need to ensure that the service replacement shock absorbers must be equivalent to the original shock absorbers in both extended length and strength.
By Omar
GM Specialist
17/03/2022
FAQ for Other Repair Info
Q: How do you install the Lower Control Arm Ball Joint?
A:
You need to install the Ball Joint to the lower control arm, the new ball joint nuts and bolts, and the steering knuckle, and finally verify the wheel alignment.
Q: What should you do when the brake caliper is separated from its mount and the hydraulic flexible brake hose is still connected?
A:
Support the Brake Caliper with heavy mechanic wire, or equivalent.
Q: How do you install the rear brake hose?
A:
You can install the Brake Line, the retaining clip, and the mounting bolt, and bleed the brake system.