Part Description: 2010 Chevrolet Colorado Lower Control Arm Mount Bushing
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: W/O Z71-Off Road Pkg; Canyon, Colorado; W/O Off Road
Location: Driver Side; Passenger Side
Other Names: Bushing, Upper Control Arm Bushing
Item Dimensions: 2.3 x 2.2 x 2.0 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2010 Chevrolet Colorado Bushings
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Other Names: Bushing, Lower Control Arm Front Bushing
Item Dimensions: 3.1 x 2.0 x 2.0 inches
Item Weight: 0.80 Pounds
Fitment Type: Direct Replacement
Part Description: 2010 Chevrolet Colorado Bushing-Front Lower Control Arm
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Bushing Asm-Front Upper Control Arm
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Premium™ Front Lower Rearward Control Arm Bushing
Vehicle Fitment
2010 Chevrolet Colorado | All Trims | All Engines
FAQ for Control Arm Bushing Repair
Q: What is the front lower control installation procedure?
A:
Install the rear bushing, the lower control arm, and the front drive axle.
By Bob
GM Specialist
15/03/2022
FAQ for Other Repair Info
Q: How do you install the Lower Control Arm Ball Joint?
A:
You need to install the Ball Joint to the lower control arm, the new ball joint nuts and bolts, and the steering knuckle, and finally verify the wheel alignment.
Q: What should you do when the brake caliper is separated from its mount and the hydraulic flexible brake hose is still connected?
A:
Support the Brake Caliper with heavy mechanic wire, or equivalent.
Q: What should you pay attention to when servicing the shock absorber?
A:
You need to ensure that the service replacement Shock Absorbers must be equivalent to the original shock absorbers in both extended length and strength.