< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Colorado Master Cylinder
PartNumber: 84497385
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.2 x 9.4 x 7.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432750
- Part Description: 2010 Chevrolet Colorado Master Cylinder
Vehicle Fitment- 2010 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$96.34 MSRP:$181.82You Save: $85.48 (48%)
Centric® Premium Brake Master Cylinder for 2010 Chevrolet Colorado
PartNumber: 130.66067Product Specifications- UPC: 805890527954
- Part Description: 2010 Chevrolet Colorado Premium Brake Master Cylinder
Vehicle Fitment- 2010 Chevrolet Colorado | All Trims | All Engines
$89.16
OEM (Genuine) 2010 Chevrolet Colorado Cylinder Asm-Clutch Master
PartNumber: 24249143
Product Specifications- Notes: Canyon, Colorado
- Other Names: Master Cylinder
- Item Dimensions: 9.0 x 8.7 x 32.1 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24235356
- Part Description: 2010 Chevrolet Colorado Cylinder Asm-Clutch Master
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$87.59 MSRP:$139.09You Save: $51.50 (38%)
Cardone Reman® Remanufactured Master Cylinder for 2010 Chevrolet Colorado
PartNumber: 10-4021Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.062"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder
- Port Quantity: 2
- Primary Port Size: M12 x 1.5
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.5
- UPC: 082617890151
- Part Description: 2010 Chevrolet Colorado Remanufactured Master Cylinder
Vehicle Fitment- 2010 Chevrolet Colorado | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How do you bleed the master cylinder bench?
A:
You can remove the master cylinder reservoir cap, install the suitable fittings, and the transparent hoses, fill the master cylinder reservoir, and remove the fittings.
By Omar
GM Specialist
16/03/2022Q: How do you remove the master cylinder reservoir?
A:
You can disconnect the brake fluid level indicator switch electrical connector, lift the reservoir, and remove the master cylinder seals.
By Bob
GM Specialist
16/03/2022Q: What is the filling procedure for the master cylinder reservoir?
A:
The procedure is to check for brake wear, and fluid leaks, and to add brake fluid you can remove the cap as well as the diaphragm.
By Omar
GM Specialist
15/03/2022Q: What is the proper way to install the master cylinder reservoir?
A:
The proper way is to install the master cylinder reservoir seals, connect the brake fluid level switch, and fill up the master cylinder reservoir.
By Omar
GM Specialist
14/03/2022Q: What is the proper way to install the master cylinder?
A:
The proper way is to install the new master cylinder and the O-ring seal, connect the master cylinder brake pipe fitting and fill the master cylinder reservoir.
By Bob
GM Specialist
14/03/2022Q: What is the removal procedure for the master cylinder?
A:
The procedure is to disconnect the brake fluid level indicator switch, and remove the master cylinder nuts, master cylinder, and the O-ring seal.
By Omar
GM Specialist
14/03/2022See more FAQs (1)