2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
FAQ for Cooling Fan Shroud Repair
Q: How many bolts attach to the cooling fan shroud?
A:
2 Bolts attaching the cooling fan shroud.
By Bob
GM Specialist
01/11/2022
Q: How to replace the cooling fan and shroud (LAU)?
A:
You should reposition the radiator forward and then disconnect the cooling fan motor wiring harness.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the cooling fan shroud bolt?
A:
The recommended torque is 8 Nm (70 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to replace the front-end upper tie bar support?
A:
You should disable the SIR system, reposition the Radiator, remove the hood primary latch bracket, disconnect the electrical connectors/harnesses as needed and transfer any parts as needed.
Q: How to replace the auxiliary water pump (LAU)?
A:
You should drain the cooling system, raise and support the vehicle, remove the auxiliary Water Pump outlet hose and the auxiliary water pump inlet hose and disconnect the electrical connector from the auxiliary water pump.
Q: How many bolts attach to the water pump pulley?