< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Axle Seal
PartNumber: 12471686
Product Specifications- Notes: 1/2 Ton
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: 2010 Cadillac Escalade ESV Axle Seal
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$11.79 MSRP:$21.32You Save: $9.53 (45%)
Centric® Premium™ Axle Shaft Seal for 2010 Cadillac Escalade ESV
PartNumber: 417.62001Product Specifications- Notes: Centric Premium Oil & Grease Seal
- UPC: 805890575191
- Part Description: 2010 Cadillac Escalade ESV Premium™ Axle Shaft Seal
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$1.27
SKF® Axle Shaft Seal for 2010 Cadillac Escalade ESV
PartNumber: 12470Product Specifications- Bore: 2.407"
- Boretite: No
- Outside Diameter: 2.412"
- Shaft: 1.248"
- UPC: 085311523684
- Width: 0.445"
- Part Description: 2010 Cadillac Escalade ESV Axle Shaft Seal
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$10.91
FAQ for Axle Shaft Seal Repair
Q: What should be done before replacing the rear axle shaft and/or gasket?
A:
You should raise and support the vehicle, and then remove the tire and wheel.
By Bob
GM Specialist
28/10/2022Q: How many bolts does the axle shaft have?
A:
The axle shaft has 8 bolts.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to install the rear axle hub, bearing, cup, and/or seal?
A:
The proper way is to install the outer bearing into the rear axle hub, install the outer bearing cup into the rear axle hub, install the retaining ring into the groove, install the inner bearing, install the rear axle hub, and then install the rear axle shaft.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the axle shaft bolt?
A:
The recommended torque is 156 Nm (115 LB ft).
By Bob
GM Specialist
28/10/2022Q: What is the proper way to install the front drive axle inner shaft seal and inner shaft bearing?
A:
The proper way is to install the right side bearing using the J 36609 and the J 8092, install the new axle shaft seal using the J 45225 and the J 8092, install the inner axle shaft into the inner axle shaft housing, install the inner axle shaft and clutch fork assembly components into the inner shaft housing, and then fill the differential carrier assembly.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the front drive axle inner shaft seal and inner shaft bearing?
A:
The procedure is to remove the right side seal and/or bearing, remove the inner axle shaft seal and/or the inner axle shaft bearing using the J 2619-01, remove the inner axle shaft using a hammer and a brass drift, remove the inner axle shaft using a hammer and a brass drift, and then remove the inner axle shaft seal and/or the inner axle shaft bearing using the J 2619-01.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the rear axle hub, bearing, cup, and/or seal?
A:
The procedure is to remove the tire and wheel assembly, remove the brake caliper bracket, remove the rear axle shaft, remove the rear axle nut retaining ring, remove the rear wheel bearing adjuster key, remove the rear axle hub from the axle housing, remove the inner hub bearing, and then remove the retaining ring from the wheel hub.
By Bob
GM Specialist
28/10/2022See more FAQs (2)