Part Description: 2009 GMC Sierra 1500 Ignition Coil
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | All Trims | 8 Cyl 4.8L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 5.3L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 6.0L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 6.2L
Show More
FAQ for Ignition Coil Repair
Q: How do you remove the spark plug wire from the ignition coil?
A:
You can twist the spark plug wire boot a 1/2 turn and pull only on the boot to remove the wire from the ignition coil.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the ignition coil bolts?
A:
You can tighten it to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the ignition lock cylinder?
A:
The procedure is to disable the SIR system, remove the steering column shroud, install the key, install a wrench into the hole on top of the Ignition Lock Cylinder case and slide the ignition lock cylinder out of the ignition lock cylinder case.
Q: How do you install the knock sensor 1?
A:
You can position the Knock Sensor to the engine block and install the knock sensor bolt and connect the engine wiring harness electrical connector to the knock sensor.
Q: What should you do when diagnosing or replacing the control module?
A:
You should inspect the control module connector gaskets when diagnosing or replacing the control module.