2009 GMC Savana 3500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque when installing the wiper motor cover onto the wiper motor with the 3 screws?
A:
You can tighten it to 3 Nm (26 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the windshield wiper motor cover?
A:
The procedure is to remove the wiper arms, remove the air inlet grille panel, disconnect the electrical connector from the wiper motor, and remove the 3 screws and the wiper motor cover from the wiper motor and remove the wiper motor cover.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the wiper motor onto the wiper transmission with the 2 bolts?
A:
You can tighten it to 8 Nm (71 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the windshield wiper motor?
A:
The procedure is to remove the following: the wiper arms, the air inlet grille panel, the wiper transmission, the 2 bolts retaining the wiper motor, and the wiper motor from the wiper transmission.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the washer pump?
A:
The procedure is to remove the following: the upper fender support, the bolt from the washer solvent container, the washer solvent container from the vehicle, the Washer Pump from the washer solvent container, and the washer solvent container cap.
Q: How do you install the windshield wiper blade?
A:
You can insert the hook of the wiper arm through the opening in the Wiper Blade, position the wiper blade pivot in the inside radius of the wiper arm hook, pull the wiper blade pivot into the wiper arm hook, and operate the wipers and inspect for proper operation.
Q: What should you do before replacing the windshield washer solvent container?
A:
You should open and support the hood and place a clean container under the work area before removing the windshield washer pump hose from the pump.