Wiper Blade Connection Type: Nine by Three and Nine by Four Hooks
Part Description: 2009 GMC Savana 3500 22" Black Beam Style Wiper Blade
More Info
Vehicle Fitment
2009 GMC Savana 3500 | All Trims | All Engines
FAQ for Wiper Blade Repair
Q: What is the removal procedure for the wiper blade element?
A:
The procedure is to remove the wiper blade from the wiper arm, remove the bottom claws of the wiper blade from the notches in the wiper blade element and pull the wiper blade element out through the wiper blade claws.
By Bob
GM Specialist
01/11/2022
Q: How do you install the wiper blade element?
A:
You can insert the open end of the wiper blade element into the bottom claws of the wiper blade, guide the wiper blade element through the wiper blade claw sets, engage the bottom claw of the wiper blade into the notches in the wiper blade element and install the wiper blade onto the wiper arm.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the windshield wiper blade?
A:
The procedure is to push the button of the wiper blade clip, remove the wiper blade from the inside radius of the wiper arm and bring the wiper arm out through the opening in the wiper blade.
By Bob
GM Specialist
01/11/2022
Q: How do you clean the wiper blade element?
A:
You can lift each blade assembly off of the windshield and clean the element with a cloth saturated with full-strength washer solvent.
By Bob
GM Specialist
01/11/2022
Q: How do you install the windshield wiper blade?
A:
You can insert the hook of the wiper arm through the opening in the wiper blade, position the wiper blade pivot in the inside radius of the wiper arm hook, pull the wiper blade pivot into the wiper arm hook, and operate the wipers and inspect for proper operation.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the washer pump?
A:
The procedure is to remove the following: the upper fender support, the bolt from the washer solvent container, the washer solvent container from the vehicle, the Washer Pump from the washer solvent container, and the washer solvent container cap.
Q: What should you do before replacing the windshield washer solvent container?
A:
You should open and support the hood and place a clean container under the work area before removing the windshield washer pump hose from the pump.
Q: What is the removal procedure for the windshield washer hose?
A:
The procedure is to remove the following: the air inlet grille panel, the washer hose grommet from the grille panel, and the washer hose from the vehicle.