2009 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
$54.60MSRP: $98.86
You Save: $44.26 (45%)
FAQ for Windshield Wiper Arms Repair
Q: What should you do before replacing the windshield wiper arm?
A:
You should electrically set the wipers to the PARK position and disconnect the washer hose elbow from the air inlet grille panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the washer pump?
A:
The procedure is to remove the following: the upper fender support, the bolt from the washer solvent container, the washer solvent container from the vehicle, the Washer Pump from the washer solvent container, and the washer solvent container cap.
Q: How do you install the windshield wiper blade?
A:
You can insert the hook of the wiper arm through the opening in the Wiper Blade, position the wiper blade pivot in the inside radius of the wiper arm hook, pull the wiper blade pivot into the wiper arm hook, and operate the wipers and inspect for proper operation.
Q: What should you do before replacing the windshield washer solvent container?
A:
You should open and support the hood and place a clean container under the work area before removing the windshield washer pump hose from the pump.