FAQ for Door Hinge Repair
Q: What is the recommended torque when installing the service hinge and backing plate?
A:
The recommended torque is 23 Nm (17 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Front Side Door Hinge Pin and Bushing?
A:
The procedure is to remove the hinge pin retainers from the hinge pins, drive out the lower and upper hinge pin, remove the bolt from the lower hinge pin hole, remove the door, remove the upper hinge pin bushings to remove the bushings from the door, and remove the lower hinge pin bushings by using a suitable tool to remove the bushings from the body.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Rear Door Hinge?
A:
The procedure is to remove the door, and the sealer that surrounds the hinge, scribe the location of the existing hinges on the body pillar or the door, mark the approximate centers of the MIG welds on the hinge base, drill a 3 mm (1/8 in) pilot hole through the spot welds at each center punch mark, drill a 13 mm hole through the hinge base and the body pillar or the door, separate the hinge from the body pillar or the door and remove the hinges from the door or the body pillar.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Rear Side Access Door Hinge?
A:
The procedure is to remove the screws and remove the hinge from the body and the door.
By BobGM Specialist
01/11/2022 Q: How do you install the Rear Side Door Latch Striker-Lower (Cargo Doors)?
A:
You need to install the lower striker, install the bolts that retain the lower striker to the stepwell, and install the side door stepwell mat.
By BobGM Specialist
29/10/2022 Q: What is the removal procedure for the Rear Side Door Latch Striker-Lower (Double Doors)?
A:
The procedure is to remove the bolts that retain the door lock striker to the door opening, and the door lock striker from the door opening.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the sliding side door rear striker bolts?
A:
The recommended torque is 24 Nm (18 lb-ft).
By BobGM Specialist
29/10/2022 Q: What is the removal procedure for the Rear Door Latch Striker - Upper?
A:
The procedure is to remove the rear door opening frame garnish molding, the bolts that retain the rear door upper striker to the door opening, and remove the rear door upper striker from the door opening.
By BobGM Specialist
29/10/2022 Q: What is the removal procedure for the Rear Side Door Latch Striker-Lower (Cargo Doors)?
A:
The procedure is to remove the side door stepwell mat, the bolts that retain the lower striker to the stepwell, and the lower striker.
By BobGM Specialist
29/10/2022 Q: How do you install the Rear Door Latch Striker - Upper?
A:
You need to install the rear door upper striker to the door opening, install the bolts to retain the rear door upper striker to the door opening, and install the rear door opening frame garnish molding.
By BobGM Specialist
29/10/2022 See more FAQs (14)