< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Trailblazer
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Trailblazer Passenger Discriminating Sensor
PartNumber: 19168633
Product Specifications- Notes: Envoy/Trailblazer/Rainier
- Location: Passenger Side
- Other Names: Passenger Discriminating Sensor, Seat Cushion Pad
- Item Dimensions: 9.7 x 25.2 x 25.5 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Trailblazer Passenger Discriminating Sensor
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$372.93 MSRP:$531.36You Save: $158.43 (30%)
OEM (Genuine) 2009 Chevrolet Trailblazer Seat Cushion Pad
PartNumber: 89043458
Product Specifications- Notes: W/Short Wheel Base, Second Row
- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Trailblazer Seat Cushion Pad
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$82.26 MSRP:$124.09You Save: $41.83 (34%)OEM (Genuine) 2009 Chevrolet Trailblazer Seat Cushion Pad
PartNumber: 89043622
Product Specifications- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 24.7 x 22.6 x 8.2 inches
- Item Weight: 20.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Trailblazer Seat Cushion Pad
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Trailblazer Seat Cushion Pad
PartNumber: 89043444
Product Specifications- Notes: W/Short Wheel Base, Second Row
- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Trailblazer Seat Cushion Pad
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Seat Cushion Pad Repair
Q: How to install the Driver or Passenger Seat Back Cushion Finish Panel?
A:
First, you need to install the seat back over the top of the seat-back frame, install the panel to the seat-back frame with 2 push-pin fasteners to each side of the panel and install the push-pin fastener to the bottom of the panel. Then, please install the lumbar cables to the panel clips, the front seat back cover and pad. Finally, you should install the front bucket seat assembly to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Back?
A:
First, you need to install the seat back to the seat adjuster, install the seat back to the seat back recliner arm with the 2 bolts, and install the seat back pivot bolt. Then, please pull the seat back cover down over the seat back pad, attach the hook and loop retaining strips, and fasten the J-strips across the bottom of the seat back cover. Finally, you should install the seat cover flaps to the seat frame with push-pins, install the seat belt anchor, the seat cushion trim panel, and the front bucket seat assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Number 1 Seat Back Release Latch?
A:
First, you need to install the release cable to the release latch. Then, please install the release latch to the seat frame by pressing the latch into the seat frame until the locking tabs are fully engaged. Finally, you should install the seat back cover and pad.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the trim panel screws?
A:
The recommended torque is 3 N.m (26 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Number 1 Back-Left?
A:
First, you need to position the left seat back to the vehicle and install the left 3 front seat back mounting nuts. Then, please tumble the left seat back to gain access to the left rear seat studs. Finally, you should install the left 2 rear seat back mounting nuts and return the left seat back to the upright position.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Number 1 Cushion Pull Strap?
A:
First, you need to install the small loop onto the rear seat cushion latch and install the strap through the opening in the seat pan. Then, please install the rear-seat cushion cover and the pad. Finally, you should install the rear seat cushion assembly to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the Seat Cushion Outer Trim Panel?
A:
First, you need to install the trim panel to the power seat. Then, please install the trim panel to the manual seat.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Seat Cushion Cover and Pad?
A:
First, you need to remove the seat cushion, the seat cushion bracket, and the seat latch bezels, and use the J 36796 to remove the push pins on the underside of the seat bottom. Then, please fold the carpet back to release the J-strips that retain the cover to the seat pan, compress the foam and partially remove the seat cover assembly from the seat pan, remove the cover from the cushion by separating the retaining strips, and separate and remove the cushion and cover assembly from the seat pan. Finally, you should release the reinforcement bar from the hog rings and remove the cover from the cushion.
By Bob
GM Specialist
01/11/2022Q: How to remove the Driver or Passenger Seat Back Cushion Finish Panel?
A:
First, you need to remove the front bucket seat assembly from the vehicle, remove the front seat back cover and pad, and remove the lumbar cables from the panel clips. Then, please remove the 2 push-pin fasteners from each side of the panel, remove the push-pin fastener from the bottom of the panel, and remove the panel from the top of the seat-back frame. Finally, you should remove the seat-back frame.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Seat Cushion Cover and Pad?
A:
First, you need to remove the 3 seat switch bezel screws, the 4 nuts retaining the seat pan to the seat adjuster assembly, remove the clip from the front outboard seat pan stud, release the J-strips on each side of the seat cushion, and release the front/rear J-strips. Then, please remove the supplemental inflatable restraint (SIR) electrical harness from the seat pan, remove the seat electrical harness and the wire harness fasteners from the seat pan, disconnect the seat cushion heater electrical connector, and separate the hook and loop retaining strips. Finally, you should remove the hog rings from the bottom rear side of the cover, remove the 11 hog rings from the top side of the cover, remove the seat cushion trim cover and pad from the seat frame, remove the seat module retaining screw, the seat module, remove the seat cover from the seat cushion, and remove the seat cushion from the seat pan.
By Bob
GM Specialist
01/11/2022See more FAQs (29)