< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Manifold
PartNumber: 12620308
Product Specifications- Notes: Tahoe, Yukon, Escalade;Tahoe, Yukon, Escalade; 4.8l, 5.3l
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 28.4 x 18.3 x 12.8 inches
- Item Weight: 17.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12597598
- Part Description: 2009 Chevrolet Tahoe Manifold
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$212.14 MSRP:$351.12You Save: $138.98 (40%)OEM (Genuine) 2009 Chevrolet Tahoe Manifold
PartNumber: 12597600
Product Specifications- Notes: Tahoe, Yukon, Escalade; 6.2l
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.5 x 19.2 x 13.3 inches
- Item Weight: 17.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Manifold
Vehicle Fitment- 2009 Chevrolet Tahoe | LTZ | 8 Cyl 6.2 L FLEX
$199.75 MSRP:$330.60You Save: $130.85 (40%)
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the intake manifold bolts?
A:
You need to tighten the bolts a first pass in the sequence shown to 5 Nm(44 lb in) and tighten the bolts a final pass in the sequence shown to 10 Nm(89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the throttle body bolts/nuts?
A:
The recommended torque is 10 Nm(89 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you remove the Upper Intake Manifold Sight Shield?
A:
You need to open the hood, grasp the front of the intake manifold sight shield and lift to disengage the grommets from the studs and remove the intake manifold sight shield from the retainer slots and the intake manifold sight shield retainer bolts and retainer.
By Bob
GM Specialist
01/11/2022Q: How do you install the upper intake manifold sight shield?
A:
You need to position the intake manifold sight shield on top of the intake manifold, align the holes, install the intake manifold sight shield retainer bolts and the intake manifold sight shield tabs into the slots in the retainer, align the intake manifold sight shield grommets with the studs, gently push down on the intake manifold sight shield over the grommets, seating the intake manifold sight shield and close the hood.
By Bob
GM Specialist
01/11/2022Q: How do you remove the upper intake manifold cover?
A:
You need to remove the intake manifold, reposition the brake booster vacuum hose clamp at the intake manifold and remove the brake booster vacuum hose from the intake manifold nipple, the upper intake manifold cover nut, and the upper intake manifold cover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail bolts?
A:
The recommended torque is 10 Nm(89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the intake manifold sight shield retainer bolts?
A:
The recommended torque is 5 Nm(44 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you install the upper intake manifold cover?
A:
You need to install the upper intake manifold cover, the upper intake manifold cover nut until snug, and the brake booster vacuum hose to the intake manifold nipple, position the brake booster vacuum hose clamp at the intake manifold and install the intake manifold.
By Bob
GM Specialist
01/11/2022See more FAQs (3)