< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Silverado, Sierra; Non-Active Fuel Management
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2009 Chevrolet Silverado 2500 HD Valve Lifters
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$36.57 MSRP:$60.54You Save: $23.97 (40%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD LIFTER ASM-VLV (AFM)
PartNumber: 12680871
Product Specifications- Other Names: Valve Lifters
- Item Dimensions: 4.0 x 2.1 x 2.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12698946
- Part Description: 2009 Chevrolet Silverado 2500 HD LIFTER ASM-VLV (AFM)
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$45.80 MSRP:$79.72You Save: $33.92 (43%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Lifter Asm, Valve
PartNumber: 97325546
Product Specifications- Other Names: Valve Lifters
- Item Dimensions: 4.2 x 4.1 x 1.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97188458
- Part Description: 2009 Chevrolet Silverado 2500 HD Lifter Asm, Valve
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
$40.38 MSRP:$70.30You Save: $29.92 (43%)
Sealed Power® Hydraulic Roller Valve Lifter for 2009 Chevrolet Silverado 2500 HD
PartNumber: HT-2148Product Specifications- Notes: Hydraulic Roller Lifters
- Note: O.E. Replacement
- UPC: 724956564873
- Part Description: 2009 Chevrolet Silverado 2500 HD Hydraulic Roller Valve Lifter
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
Sealed Power® Engine Valve Lifter for 2009 Chevrolet Silverado 2500 HD
PartNumber: HT-2148BProduct Specifications- Notes: Box of 128;Hydraulic Roller Lifters;Bulk Pack
- Note: O.E. Replacement
- Package Alert: Carton of 128
- UPC: 724956696369
- Part Description: 2009 Chevrolet Silverado 2500 HD Engine Valve Lifter
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
FAQ for Valve Lifter Repair
Q: What is the proper way to install the valve lifter (LH6, LMG, LY5, and L76)?
A:
You can lubricate the valve lifters and engine block valve lifter bores with clean engine oil, insert the valve lifters into the lifter guides, install the valve lifters and guide, install the valve lifter guide bolts and install the cylinder head and gasket.
By Bob
GM Specialist
02/11/2022Q: How do you replace the Valve Lifter Oil Manifold?
A:
You can remove the intake manifold, disconnect the engine harness electrical connector, remove the valve lifter oil manifold bolts and the valve lifter oil manifold, identify the 8 gasket retaining strap locations, cut the 8 retaining straps, and remove the outer gasket.
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter Oil Filter?
A:
You can install a new valve lifter oil filter O-ring seal, install the new valve lifter oil filter, apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the oil pressure sensor, install the oil pressure sensor washer and sensor, connect the engine harness electrical connector and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Valve Lifter Oil Filter?
A:
The procedure is to remove the intake manifold, disconnect the engine harness electrical connector, remove the oil pressure sensor and washer, remove and discard the valve lifter oil filter and remove and discard the valve lifter oil filter O-ring seal.
By Bob
GM Specialist
02/11/2022Q: How do you replace the valve lifter (LH6, LMG, LY5, and L76)?
A:
You can remove the cylinder head and gasket, remove the valve lifter guide bolts, remove the valve lifter guides with the lifters, remove the valve lifters, organize or mark the components, and clean and inspect the valve lifters.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the Valve Lifter Oil Manifold?
A:
You can place the service gasket onto the valve lifter oil manifold, install the valve lifter oil manifold and the valve lifter oil manifold bolts, connect the engine harness electrical connector to the oil pressure sensor and install the intake manifold.
By Bob
GM Specialist
02/11/2022See more FAQs (1)