< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Express 2500
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Express 2500 Drier
PartNumber: 84451983
Product Specifications- Notes: 4.8, 5.3 & 6.0 Liter; 6.6 Liter Diesel; Express, Savana
- Other Names: Accumulator, Drier
- Item Dimensions: 15.1 x 8.1 x 7.0 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25760829, 25890358, 15750663
- Part Description: 2009 Chevrolet Express 2500 Drier
Vehicle Fitment- 2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$69.29 MSRP:$130.75You Save: $61.46 (48%)
Spectra Premium® A/C Accumulator for 2009 Chevrolet Express 2500
PartNumber: 0210110Product Specifications- UPC: 671607224214
- Part Description: 2009 Chevrolet Express 2500 A/C Accumulator
Vehicle Fitment- 2009 Chevrolet Express 2500 | All Trims | All Engines
$18.19
Four Seasons® Accumulator for 2009 Chevrolet Express 2500
PartNumber: 83238Product Specifications- Body Diameter: 3.500
- Body Length: 8.750
- Dia. MM: 88.900
- Inlet Fitting Diameter: 3/4
- Inlet Fitting Type: P-Nut Fitting
- Length MM: 222.250
- Material: Aluminum
- Meets / Exceeds OEM: Yes
- Mounting Hardware: Hardware not included.
- O-Ring A Number/Desc: [24676] / Green O-Ring
- O-Ring A Quantity: 1
- O-Ring B Number/Desc: [24404] / Slimline Washer
- O-Ring B Quantity: 2
- Outlet Fitting Type: P-Nut Fitting
- Outlet Fraction: 1-1/8
- Style: Complete Unit
- Switch: w/ Switch Port
- Switch Port Dia. IN: 0.472
- Switch Port Dia.MM: 12.000
- Switch Service Port: w/ Service Port
- UPC: 096361832381
- Part Description: 2009 Chevrolet Express 2500 Accumulator
Vehicle Fitment- 2009 Chevrolet Express 2500 | All Trims | All Engines
$21.95
FAQ for A/C Accumulator Repair
Q: What should you do if the accumulator needs replacing?
A:
You need to add the specified amount of PAG oil directly into the accumulator.
By Omar
GM Specialist
05/02/2022Q: What can you do to assist with the piston removal?
A:
You need to apply low-pressure compressed air to the hole at the top of the accumulator housing, which is helpful for piston removal.
By Bob
GM Specialist
04/02/2022Q: What is the recommended torque for the evaporator outlet pipe retaining nut?
A:
The recommended torque is 16 Nm (12 lb-ft).
By Omar
GM Specialist
02/02/2022Q: What kind of special tool will be needed in the removal of the Air Conditioning Accumulator?
A:
J39400-A Halogen Leak Detector.
By Omar
GM Specialist
29/01/2022Q: What kind of special tools will be used when removing the Accumulator Assembly, Spacer Plate, and Gaskets?
A:
J25025-B Pump and Valve Body Alignment Pin Set, and J 36850 Transjel Lubricant.
By Bob
GM Specialist
27/01/2022Q: What kind of special tools will be used when removing the Accumulator Housing?
A:
J25025 Guide Pins.
By Omar
GM Specialist
27/01/2022Q: Why should you be careful when removing the spacer plate?
A:
You need to make sure that the number 1 check ball, the 3-4 accumulator spring, and the 3-4 accumulator pin are not removed along with it.
By Omar
GM Specialist
25/01/2022See more FAQs (2)