< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Colorado
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 25980812
Product Specifications- Item Dimensions: 4.4 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)OEM (Genuine) 2009 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 20864450Product Specifications- Notes: Canyon, Colorado; W/Off Road
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2009 Chevrolet Colorado Side Sensor
PartNumber: 10368336
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15106279
- Part Description: 2009 Chevrolet Colorado Side Sensor
Vehicle Fitment- 2009 Chevrolet Colorado | LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$23.97 MSRP:$36.17You Save: $12.20 (34%)
FAQ for Air Bag Sensor Repair
Q: What is the steering wheel inflatable restraint module installation procedure?
A:
Connect the electrical connectors to the inflatable restraint steering wheel module and connect the horn electrical connector. Next position the 4 alignment posts of the inflatable restraint module to the holes that are located on the steering wheel housing. Enable the inflatable restraint steering wheel module.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint roof-side rail module installation procedure?
A:
First, install the bolts retaining the roof rail airbag module on the roof. Make sure to tighten the roof. All airbag module bolts to 9 Nm and install the forward curtain clip. Next, install the bolt retaining the bracket to the roof and install the clips to the pillar. Install the headliner, enable the SIR system and install the head restraints from the front seats.
By Bob
GM Specialist
01/11/2022Q: What is the instrument panel inflatable restraint module installation procedure?
A:
Start by installing the 2 fasteners retaining the PSIR bracket to the I/P structure and tighten the fasteners to 9 Nm. Next install the I/P assembly, the PSIR inflator to the I/P, and the 2 side retaining nuts to the PSIR inflator module. After that, install the digital radio, the radio, and the I/P accessory trim panel. Install the right air outlet, the right access cover to the I/P end cap, and the I/P compartment door.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint vehicle rollover sensor installation procedure?
A:
Install the nuts and tighten the screws to 10 Nm. Next, connect the electrical connectors, install the carpet and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint side impact sensor installation procedure?
A:
Install the screws that retain the side impact sensor to the door and tighten the screws to 9 Nm. Next, seat the water deflector to the door and install the door trim panel. Finally, enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint front-end sensor service procedure?
A:
Disable the SIR system, and remove the grille and the sensor assembly from the radiator support. Next position the sensor assembly, remove the CPA, and disconnect the sensor electrical connector. Finally, remove the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint vehicle rollover sensor removal procedure?
A:
First, disable the SIR system, fold back the carpet, and disconnect the electrical connector. Finally, remove the nuts securing the rollover sensor to the floor panel.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint sensing and diagnostic module installation procedure?
A:
First, install the SDM to the floor studs with 3 nuts and tighten the SDM nuts to 9 Nm. Next, connect the electrical connector to the SDM and install the floor console. Enable the SIR system and program the SDM.
By Bob
GM Specialist
28/10/2022See more FAQs (3)