< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Aveo
< Back to View All
TPMS Sensors
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Aveo Sensor
PartNumber: 13598771
Product Specifications- Other Names: Sensor, Tire Pressure Sensor
- Item Dimensions: 3.6 x 1.8 x 1.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 13540600
- Part Description: 2009 Chevrolet Aveo Sensor
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$56.45 MSRP:$106.52You Save: $50.07 (48%)
Dorman® Tpms Sensor for 2009 Chevrolet Aveo
PartNumber: 974-009Product Specifications- Maximum Pressure Reading: 40 PSI
- OE Part Number: 10394110, 12768826, 13586335, 15268606, 15825475, 15921013, 15922396, 20922900, 20923680, 20925924, 22853741, 22854866, 25920615, 25952370, 43130-85Z00, 43130-85Z03, 15254101, 25799331, 15123145, 15202272
- UPC: 019495230236
- Valve Color: Silver
- Valve Length: 0.50 in
- Part Description: 2009 Chevrolet Aveo Tpms Sensor
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | All Engines
$34.13
OEM (Genuine) 2009 Chevrolet Aveo Sensor
PartNumber: 13540600
Product Specifications- Replaces: 13598771, 25799331, 13586335, 15825475, 15922396, 20923680, 25920615, 22853741, 23445327, 15254101
- Part Description: 2009 Chevrolet Aveo Sensor
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$56.45 MSRP:$106.52You Save: $50.07 (48%)
Denso® TPMS Sensor for 2009 Chevrolet Aveo
PartNumber: 550-2400Product Specifications- Notes: 315 MHz, Snap In, 11.5 in-lbs, 1.3 N.m; OE Manufactured
- Gasket or Seal Included: YES
- Monitor Type: Direct
- Mounting Hardware Included: YES
- Mounting Method: Snap In
- Power Source: Electric
- Real Time Pressure Signal Transmission: YES
- Universal Or Specific Fit: Specific
- UPC: 042511218116
- Part Description: 2009 Chevrolet Aveo TPMS Sensor
Vehicle Fitment- 2009 Chevrolet Aveo | All Trims | All Engines
FAQ for TPMS Sensor Repair
Q: What is the removal procedure for the low tire pressure indicator?
A:
The procedure is to disconnect the hood release cable and remove the I/P undercover, and the tire pressure module.
By Omar
GM Specialist
13/12/2021Q: How do you remove the tire pressure indicator sensor?
A:
You can remove the tire pressure indicator sensor by removing the tire from the wheel, and the TORX screw, and pulling the valve stem.
By Bob
GM Specialist
31/10/2021Q: What can cause ride and noise concerns when driving the vehicle?
A:
Improperly adjusted tire pressure may be the cause of ride and noise concerns.
By Omar
GM Specialist
28/10/2021Q: What is the proper way to install the low tire pressure indicator?
A:
The proper way is to install and connect the tire pressure module, install the I/P undercover and connect the hood release cable.
By Bob
GM Specialist
27/10/2021Q: What is the installation procedure for the tire pressure indicator sensor?
A:
The procedure is to hold the stem without the valve core, align the sensor, install the tire to the wheel and configure the tire pressure system.
By Bob
GM Specialist
26/10/2021