2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Side View Mirrors Repair
Q: What is the installation procedure for the rearview mirror motor?
A:
The procedure is to install the screws, the mirror face, and the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the rearview mirror motor?
A:
The proper way is to remove the trim panel, the mirror face, and the motor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to remove the door lock switch?
A:
The proper way is to remove the door trim panel, the retainer screws, and the power Door Lock Switch.
Q: What is the hood primary and secondary latch installation procedure?
A:
First, install the Hood Latch to the latch support, install the bolts attaching the latch to the latch support, and tighten to 9 Nm. Next, connect the hood release cable to the latch and the secondary latch cable to the latch. Lower the hood and check the latch for proper alignment. Finally, install the front section of the air cleaner assembly.
Q: What is the hood primary latch release cable installation procedure?
A:
Position the Hood Release Cable to the vehicle and install the hood release cable grommet to the front of the dash panel. Next, install the screws securing the hood release handle to the vehicle and tighten to 2 Nm. After that install the hood release cable to the clips retaining the cable to the vehicle. Connect the hood release cable to the hood latch and install all related panels/components.