< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Panel Asm, Rear Compartment (Rear Half Only, Less Rails)
PartNumber: 89022238
Product Specifications- Other Names: Rear Floor Pan
- Item Dimensions: 61.3 x 37.7 x 8.2 inches
- Item Weight: 19.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Panel Asm, Rear Compartment (Rear Half Only, Less Rails)
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Floor Pan Repair
Q: How do you install the rear floor panel carpet?
A:
You can place the carpet into the vehicle, ensure the electrical connectors are exposed above the carpeting, secure the rear carpet hook and latch material to the intermediate carpet in four places, press the carpet to the floor pan, and install the body side trim panels, the rear sill plate, the rear carpet retainers, the rear seat no. 2 and the rear seat no. 1.
By Bob
GM Specialist
29/10/2022Q: Can you use GM Vehicle Care Odor Eliminator as an air freshener?
A:
No, this product leaves no residual scent and should not be used as an air freshener.
By Bob
GM Specialist
29/10/2022Q: Where can you safely use GM Vehicle Care Odor Eliminator?
A:
You can safely use GM Vehicle Care Odor Eliminator on fabrics, vinyl, leather, carpet, and sound-deadening materials.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the rear side door opening floor carpet retainer?
A:
The procedure is to release the retainer clips, tilt the carpet retainer inward, pull downward, and remove the rear carpet retainer.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the front side door opening floor carpet retainer?
A:
The procedure is to release the retainer clips from the rocker panel, slide the carpet retainer rearward and remove the front carpet retainer.
By Bob
GM Specialist
29/10/2022Q: What should you replace for a 1-piece carpet assembly bonded to cotton or fiber padding?
A:
You should replace the entire assembly.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the front floor panel carpet?
A:
The procedure is to remove the appropriate front seat, the center console, the front carpet retainer, the rear carpet retainer, the center pillar garnish molding, and the carpet.
By Bob
GM Specialist
29/10/2022Q: How do you install the front floor panel carpet?
A:
You can position the front floor carpet into place, make sure the electrical connector is carefully positioned under the front carpet piece, align the carpet to the dash panel, rocker panel, tunnel, and seat attachment areas, tuck the carpet behind the tab on the HVAC duct, ensure all wrinkles are removed, install the center console, install the center pillar garnish molding and install the front carpet retainer, the rear carpet retainer, and the front seat.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the rear floor panel carpet?
A:
The procedure is to remove the rear seat no. 1, the rear seat no. 2, the rear carpet retainers, the rear sill plate, the body side rear trim panels, and the rear carpet.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the intermediate carpet?
A:
The procedure is to remove the front seats, the center console, the rear seat, the front carpet retainers, and the rear carpet retainers, disconnect the push-in retainers at the rear ducts, lift the rear carpet, remove the intermediate carpet, disconnect the push-in retainers from the air ducts to carpet and remove the air ducts from the carpeting.
By Bob
GM Specialist
29/10/2022See more FAQs (9)