< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Power Steering Lines & Hoses
- Department
- Brands
- Prices
OEM (Genuine) 2008 GMC Yukon Pressure Hose
PartNumber: 25858603
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Power Steering Pressure Hose, Pressure Hose
- Item Dimensions: 7.5 x 3.0 x 14.6 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Pressure Hose
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$90.63 MSRP:$150.04You Save: $59.41 (40%)
Gates® Power Steering Return Line Hose Assembly Cooler To Reservoir for 2008 GMC Yukon
PartNumber: 352281Product Specifications- Notes: Cut to Length, 20"; Cut to fit
- End 1 Diameter: 0.375"
- End 1 Type: I.D. Hose
- Length: 37"
- UPC: 770075666301
- Part Description: 2008 GMC Yukon Power Steering Return Line Hose Assembly Cooler To Reservoir
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
$58.99
OEM (Genuine) 2008 GMC Yukon Return Hose
PartNumber: 15812565
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Power Steering Return Hose, Return Hose
- Item Dimensions: 9.4 x 29.3 x 0.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Return Hose
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$55.80 MSRP:$92.39You Save: $36.59 (40%)
Gates® Power Steering Pressure Line Hose Assembly for 2008 GMC Yukon
PartNumber: 352182Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Diameter (mm): 16 mm
- End 2 Type: Male O-Ring
- Length: 36"
- Switch Port: Without Switch Port
- UPC: 770075609070
- Part Description: 2008 GMC Yukon Power Steering Pressure Line Hose Assembly
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
$41.71
Gates® Power Steering Return Line Hose Assembly Gear To Cooler for 2008 GMC Yukon
PartNumber: 352183Product Specifications- End 1 Diameter: 0.375"
- End 1 Type: Male Quick Connect
- End 2 Type: I.D. Hose
- Length: 28"
- UPC: 770075547501
- Part Description: 2008 GMC Yukon Power Steering Return Line Hose Assembly Gear To Cooler
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
OEM (Genuine) 2008 GMC Yukon Pipe Kit, Steering Gear (Light)
PartNumber: 15254058
Product Specifications- Location: Passenger Side
- Other Names: Pipe Kit
- Item Dimensions: 6.1 x 5.7 x 21.3 inches
- Item Weight: 0.70 Pounds
- Part Description: 2008 GMC Yukon Pipe Kit, Steering Gear (Light)
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
OEM (Genuine) 2008 GMC Yukon Pipe Kit, Steering Gear (Right)
PartNumber: 15254059
Product Specifications- Location: Driver Side
- Other Names: Pipe Kit
- Item Dimensions: 15.3 x 11.5 x 0.8 inches
- Item Weight: 0.70 Pounds
- Part Description: 2008 GMC Yukon Pipe Kit, Steering Gear (Right)
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
FAQ for Power Steering Hose Repair
Q: What's the recommended torque for the power steering gear inlet hose fitting?
A:
The recommended torque is 32 N.m.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Gear Inlet Pipe/Hose?
A:
You can install drain pans under the vehicle as needed, remove the power steering gear inlet hose, remove the power steering gear inlet hose, and remove the power steering gear inlet hose from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Gear Inlet Pipe/Hose?
A:
You can route the power steering gear inlet hose in the same position it was in prior to removal, install the power steering gear inlet hose, install the power steering gear inlet hose, clean any excess fluid, remove the drain pans, fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the power steering gear inlet hose retaining plate bolt?
A:
The recommended torque is 12 N.m.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Power Steering Gear Outlet Pipe/Hose?
A:
You can place drain pans under the vehicle as needed, disconnect the power steering fluid cooler hose clamp and hose from the steering gear, and remove the power steering gear outlet pipe.
By Bob
GM Specialist
02/11/2022Q: How do you install the Power Steering Gear Outlet Pipe/Hose?
A:
You can install the power steering gear outlet pipe to the steering gear, connect the power steering fluid cooler hose and hose clamp to the steering gear, remove the drain pans, and fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022Q: What is the special tool for the Power Steering Gear Inlet Pipe/Hose Replacement?
A:
The special tool is the J 44586 Power Steering Gear Oil Seal Remover/Installer.
By Bob
GM Specialist
02/11/2022Q: How do you replace the Power Steering Gear Inlet Pipe/Hose?
A:
You should remove the engine shield, remove as much power steering fluid from the power steering fluid reservoir as possible and place drain pans under the vehicle as needed.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when you disconnect the Power Steering Hose?
A:
You should not start the vehicle with any power steering gear inlet or outlet hoses disconnected, and when disconnected, you should plug or cap all openings of components.
By Bob
GM Specialist
02/11/2022Q: How do you replace the Power Steering Gear Outlet Pipe/Hose?
A:
You can remove the engine shield, place drain pans under the vehicle as needed, disconnect the power steering gear outlet hose, pull the power steering gear outlet hose out of the steering gear, keep all open connections in the power steering system clean and free of debris, use the remover/installer J 44586 to replace the steering gear seals if necessary, and fill and bleed the power steering system.
By Bob
GM Specialist
02/11/2022See more FAQs (5)