< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
OEM (Genuine) 2008 GMC Yukon Rear Cable
PartNumber: 25864664
Product Specifications- Notes: Tahoe, Yukon, Escalade; Right
- Other Names: Rear Cable
- Item Dimensions: 4.1 x 14.6 x 13.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15183625
- Part Description: 2008 GMC Yukon Rear Cable
Vehicle Fitment- 2008 GMC Yukon | Denali, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L GAS
$78.24 MSRP:$147.63You Save: $69.39 (48%)OEM (Genuine) 2008 GMC Yukon Rear Cable
PartNumber: 25793731
Product Specifications- Notes: Tahoe, Yukon, Escalade; Left
- Other Names: Rear Cable
- Item Dimensions: 4.0 x 11.2 x 11.6 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Rear Cable
Vehicle Fitment- 2008 GMC Yukon | Denali, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L GAS
$53.02 MSRP:$100.07You Save: $47.05 (48%)OEM (Genuine) 2008 GMC Yukon Intermediate Cable
PartNumber: 15183623Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Intermediate Cable
- Item Dimensions: 10.6 x 10.5 x 3.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Intermediate Cable
Vehicle Fitment- 2008 GMC Yukon | Denali, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L GAS
$29.03 MSRP:$54.80You Save: $25.77 (48%)
FAQ for Parking Brake Cable Repair
Q: What's the procedure for the Parking Brake Cable Adjuster Disabling?
A:
You should raise and support the vehicle, hold the pedal in the FULL upward position, pull rearward on the front park brake cable until the pedal drum reaches its full reset position, insert a thin tool on an upward angle through the hole in the front of the pedal assembly, past the retracted pedal drum, and into the hole in the back of the pedal assembly, slowly release the cable and remove the component that requires service.
By Bob
GM Specialist
02/11/2022Q: What's the procedure for the Parking Brake Cable Adjuster Enabling?
A:
You should hold the park brake pedal in the FULL upward position, pull rearward on the front park brake cable until the tension is released from the tool installed in the pedal assembly, remove the tool, and slowly release the park brake cable until it returns to its original position, release the park brake pedal, lower the vehicle, apply and release the park brake pedal 3 times.
By Bob
GM Specialist
02/11/2022Q: How do you install the Park Brake Cable Guide?
A:
You can install the park brake cable guide to the park brake cable, install the park brake cable guide, install the park brake cable guide bolt to the frame and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Park Brake Cable Guide?
A:
You can release the parking brake, raise and support the vehicle, remove the park brake cable guide bolt from the frame, remove the park brake cable guide and remove the park brake cable guide from the park brake cable.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the bolt attaching to the rear axle cable clip?
A:
The recommended torque is 22 N.m.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the bolt?
A:
The recommended torque is 22 N.m.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Parking Brake Rear Cable?
A:
You can ensure the parking brake is released, disable the park brake cable, and automatic adjuster, disconnect the left rear park brake cable, remove the park brake cable, remove the nut and bolt, release the park brake cable, remove the park brake cable from the actuator lever, remove the park brake cable from the backing plate by depressing the locking tabs and remove the park brake cable.
By Bob
GM Specialist
02/11/2022See more FAQs (2)