< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2008 GMC Yukon Motor Nut
PartNumber: 11516078
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 1.6 x 1.5 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11518997, 11588927, 11508101
- Part Description: 2008 GMC Yukon Motor Nut
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$4.54 MSRP:$7.20You Save: $2.66 (37%)
OEM (Genuine) 2008 GMC Yukon Alignment Cam
PartNumber: 15741217
Product Specifications- Notes: 2WD; 4WD
- Location: Passenger Side; Driver Side
- Other Names: Alignment Cam
- Item Dimensions: 3.3 x 2.4 x 0.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Alignment Cam
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$4.54 MSRP:$7.17You Save: $2.63 (37%)
OEM (Genuine) 2008 GMC Yukon Cam Kit, Front Upper Control Arm Adjust
PartNumber: 12472859
Product Specifications- Notes: 2WD; 4WD
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam
- Item Dimensions: 6.1 x 5.8 x 3.3 inches
- Item Weight: 2.60 Pounds
- Part Description: 2008 GMC Yukon Cam Kit, Front Upper Control Arm Adjust
Vehicle Fitment- 2008 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What's the recommended torque for the cam nuts?
A:
The recommended torque is 190 Nm.
By Bob
GM Specialist
01/11/2022Q: What are the causes of improper alignment?
A:
One possible cause is wheel and tire imbalance, and another possibility is tire lead due to worn or improperly manufactured tires.
By Bob
GM Specialist
01/11/2022Q: What should you do before adjusting the caster and camber angles?
A:
You should jounce the front bumper 3 times to allow the vehicle to return to normal height, and measure and adjust the caster and the camber with the vehicle at curb height.
By Bob
GM Specialist
01/11/2022Q: What do you do to measure the front and rear alignment angles?
A:
You can install the alignment equipment according to the manufacturer's instructions, jounce the front and the rear bumpers 3 times before checking the wheel alignment, measure the alignment angles, and record the readings.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the tie rod jam?
A:
The recommended torque is 75 N.m(55 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How can you adjust the Front Toe?
A:
You can loosen the jam nut on the inner tie rod, rotate the inner tie rod to the required toe specification setting, tighten the jam nut on the tie rod, check the toe setting after tightening, and re-adjust the toe setting if necessary.
By Bob
GM Specialist
01/11/2022See more FAQs (1)