< Back ×
My Vehicle Change Vehicle
2008 Chevrolet Trailblazer
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2008 Chevrolet Trailblazer U-Bolt Nut
PartNumber: 11516382
Product Specifications- Notes: W/O Auto Level Control, Type 3; W/O Auto Level Control, Type 1; W/Auto Level Control, Type 3; W/Auto Level Control, Type 1
- Location: Driver Side; Passenger Side
- Item Dimensions: 4.2 x 3.0 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22123946, 15702050, 15048124, 14013439
- Part Description: 2008 Chevrolet Trailblazer U-Bolt Nut
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$1.14 MSRP:$1.79You Save: $0.65 (37%)
OEM (Genuine) 2008 Chevrolet Trailblazer Bolt, Rear Axle
PartNumber: 22629930
Product Specifications- Notes: W/O Auto Level Control, #4; W/Auto Level Control, #4
- Location: Driver Side; Passenger Side
- Item Dimensions: 5.1 x 3.6 x 2.1 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Chevrolet Trailblazer Bolt, Rear Axle
Vehicle Fitment- 2008 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Camber and Alignment Kit Repair
Q: How to adjust the Front Toe?
A:
You should loosen the jam nut on the outer tie rod, rotate the inner tie rod to the required toe specification setting, tighten the jam nut on the outer tie rod, check the toe setting, and re-adjust the toe setting.
By Bob
GM Specialist
01/11/2022Q: What should you do before adjusting the caster and camber angles?
A:
You should jounce the front bumper 3 times to allow the vehicle to return to normal height before adjusting the caster and camber angles.
By Bob
GM Specialist
01/11/2022Q: What should be noted when performing adjustments to vehicles requiring a 4-wheel alignment?
A:
You should set the rear wheel alignment angles first to obtain proper front alignment angles.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the outer tie rod jam nut?
A:
The recommended torque is 75 N.m (55 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to measure the front and rear alignment angles?
A:
First, you should install the alignment equipment and jounce the bumpers 3 times. Next, you should measure the alignment angles and record the readings.
By Bob
GM Specialist
01/11/2022Q: How to adjust the Front Caster and Camber?
A:
The caster and camber adjustments are made by loosening the lower control arm adjustment bolts and repositioning the lower control arm.
By Bob
GM Specialist
01/11/2022See more FAQs (1)