2008 Cadillac SRX Radiator Hose

You should install the inlet radiator hose into the vehicle, lubricate the inside diameters of the hoses with clean coolant, disengage the tension on the hose clamp and the radiator inlet hose to the radiator, slide the clamp into the original position, disengage the tension on the hose clamp and install the radiator inlet hose to the thermostat housing, slide the clamp into the original position and fill the cooling system.

You should drain the coolant, use the J 38185 to disengage the tension on the hose clamp, remove the radiator inlet hose from the thermostat housing, disengage the tension on the hose clamp and remove the radiator inlet hose from the radiator and the radiator inlet hose from the vehicle.

You should drain the coolant, remove the radiator inlet hose, disengage the tension on the hose clamp, remove the radiator outlet hose from the thermostat housing, disconnect the radiator outlet hose from the engine support bracket, remove the air cleaner intake duct, disengage the tension on the hose clamp and remove the radiator outlet hose from the radiator and the radiator outlet hose from the vehicle.