FAQ for Door Seal Repair
Q: How to remove the Front Side Door Upper Auxiliary Weatherstrip?
A:
You should lower the window to the full down position and remove the power mirror, the window outer belt sealing strip, the screws from the front door upper auxiliary molding, the push-in fastener, and the upper auxiliary molding.
By BobGM Specialist
01/11/2022 Q: How to install the Front Side Door Bottom Auxiliary Sealing Strip?
A:
You should install the front door bottom sealing strip to the inside lower door edge and secure the sealing strip by inserting the retainers into the holes in the lower door panel.
By BobGM Specialist
01/11/2022 Q: How to remove the Front Door Opening Weatherstrip?
A:
You should remove the carpet retainer, start at the rear upper corner of the door opening, pull the weatherstrip away from the door opening flange, work around the door opening and remove the weatherstrip.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Side Door Upper Auxiliary Weatherstrip?
A:
You should lower the window to the full down position and remove the rear door stationary window/division channel, the screws from the rear door upper auxiliary weatherstrip, and the upper auxiliary weatherstrip.
By BobGM Specialist
01/11/2022 Q: How to install the Front Door Opening Weatherstrip?
A:
You should work downward along the rear edge, install the weatherstrip on the door opening flange, install the weatherstrip along the roof rail and the window-pillar flange, ensure that the weatherstrip is seated on the entire door opening flange, position the close-out lip over the interior trim around the door opening and install the carpet retainer.
By BobGM Specialist
01/11/2022 Q: How to install the Front Side Door Upper Auxiliary Weatherstrip?
A:
You should install the front door upper auxiliary molding onto the door frame, the upper, rear, and corner screws, the push-in fastener to the door, the screws, the outer belt sealing strip, and the power mirror.
By BobGM Specialist
01/11/2022 Q: How to install the Rear Side Door Bottom Auxiliary Sealing Strip?
A:
You should install the rear door bottom sealing strip onto the inside lower door edge and secure the sealing strip by inserting the retainers into the holes in the lower door panel.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Side Door Bottom Auxiliary Sealing Strip?
A:
With the door open, you should remove the rear door bottom sealing strip retainers and the sealing strip.
By BobGM Specialist
01/11/2022 Q: How to install the Rear Side Door Upper Auxiliary Weatherstrip?
A:
You should install the rear door upper auxiliary weatherstrip onto the door frame, the screws working from the front to the rear, and the rear door stationary window/division channel.
By BobGM Specialist
01/11/2022 Q: How to install the Rear Door Opening Weatherstrip?
A:
You should position the weatherstrip in the upper corner of the center pillar, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners and the weatherstrip along the roof rail and the rear of the door opening, ensure that the weatherstrip is seated on the entire door opening flange, position the close-out lip over the interior trim around the door opening, or reposition the lip over the interior trim and install the carpet retainer.
By BobGM Specialist
01/11/2022 See more FAQs (7)