< Back ×
My Vehicle Change Vehicle
2008 Cadillac SRX
< Back to View All
Coil Springs
- Department
- Prices
OEM (Genuine) 2008 Cadillac SRX Front Springs
PartNumber: 25810848
Product Specifications- Notes: Srx; All
- Other Names: Coil Spring
- Item Dimensions: 10.7 x 5.2 x 5.2 inches
- Item Weight: 6.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Front Springs
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Rear Spring
PartNumber: 10356529
Product Specifications- Notes: W/O Magnetic Ride Cn; Srx
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Item Dimensions: 22.6 x 6.5 x 6.9 inches
- Item Weight: 10.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Rear Spring
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Front Spring
PartNumber: 25810851
Product Specifications- Notes: 2WD, W/O Sport Susp; AWD, W/O Sport Susp
- Other Names: Coil Spring, Spring
- Item Dimensions: 11.6 x 5.3 x 5.3 inches
- Item Weight: 9.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25816759, 25750158, 15868835, 15797105
- Part Description: 2008 Cadillac SRX Front Spring
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Coil Spring
PartNumber: 88955536
Product Specifications- Notes: 2WD, W/Sport Susp; AWD, W/Sport Susp
- Other Names: Spring
- Item Dimensions: 22.7 x 6.2 x 6.1 inches
- Item Weight: 7.50 Pounds
- Part Description: 2008 Cadillac SRX Coil Spring
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2008 Cadillac SRX Rear Spring
PartNumber: 10356530Product Specifications- Notes: W/Magnetic Ride Cntl
- Location: Driver Side; Passenger Side
- Other Names: Spring
- Item Dimensions: 16.9 x 6.6 x 6.6 inches
- Item Weight: 10.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 Cadillac SRX Rear Spring
Vehicle Fitment- 2008 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Coil Springs Repair
Q: How to install the Coil Spring Insulators?
A:
You should install the upper coil spring insulator, the lower coil spring insulator, and the rear coil spring, lower the vehicle and adjust the rear camber.
By Bob
GM Specialist
01/11/2022Q: How to avoid chipping or scratching the coating?
A:
You should take care to avoid chipping or scratching the coating when handling the suspension coil spring and damage to the coating can cause premature failure.
By Bob
GM Specialist
01/11/2022Q: How to remove the Shock, Shock Component, and/or Spring?
A:
You should use care when handling the coil springs to avoid chipping or scratching the coating, raise and support the vehicle, remove the tire and wheel and the shock module from the vehicle, install the shock module into the spring compressor, mark the upper control arm assembly and insulator for proper installation, turn the spring compressor forcing screw until the coil spring is compressed, remove the magnitude sensor nut, the shock absorber upper retaining nut and the shock absorber from the shock module, loosen the compressor forcing screw until the upper mounting plate and coil spring may be removed and remove the upper control arm bracket assembly, insulator and coil spring from the spring compressor.
By Bob
GM Specialist
01/11/2022Q: How to remove the Coil Spring Insulators?
A:
You should raise and support the vehicle and remove the rear coil spring, the upper coil spring insulator, and the lower coil spring insulator.
By Bob
GM Specialist
01/11/2022Q: How to remove the Coil Spring?
A:
You should raise and support the vehicle, remove the tire and wheel, disconnect the automatic level control sensor link from the upper control arm and the headlamp adjustment link from the upper control arm, support and raise the lower control arm using a suitable jack, remove the shock absorber lower mounting bolt, lower the lower control arm and remove the support, support the rear frame with a suitable jack, remove the frame to body side mounting bolts and washers, lower the side of the frame and remove the coil spring from the vehicle.
By Bob
GM Specialist
01/11/2022