2008 Cadillac SRX Steering Knuckle

You should raise and support the vehicle, remove the tire and wheel, the air deflector, the shock module yoke from the lower Control Arm, the stabilizer shaft link lower retaining nut, the stabilizer shaft link from the lower control arm, the ABS wire harness from the lower control arm and the lower control arm to steering knuckle nut, separate the lower control arm from the steering knuckle, loosen the power steering gear retaining bolts and raise the power steering gear and remove the lower control arm to cradle nuts, the lower control arm to cradle bolts and the lower control arm by lowering the lower control arm at the frame and moving the ball stud upwards.

You should raise and support the vehicle, remove the tire and wheel, the automatic level control link from the upper control arm, the brake pipe bracket retaining nuts, and the brake pipe bracket from the mounting studs, support the lower control arm, remove the trailing link to knuckle nut, the trailing link to knuckle bolt and the jack, support the frame with a suitable jack, remove the front bolts from the frame, lower the front of the rear frame and remove the trailing link to frame nut, the trailing link to frame bolt and the trailing link from the vehicle.