< Back ×
My Vehicle Change Vehicle
2008 Cadillac DTS
< Back to View All
Cigarette Lighters
- Department
- Prices
OEM (Genuine) 2008 Cadillac DTS Lighter Housing
PartNumber: 25774623
Product Specifications- Notes: Seat Cushion Components, Driver Seat
- Location: Driver Side
- Item Dimensions: 2.8 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999477, 12450044, 01999477
- Part Description: 2008 Cadillac DTS Lighter Housing
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$7.04 MSRP:$10.60You Save: $3.56 (34%)
OEM (Genuine) 2008 Cadillac DTS Receptacle Asm, Cigarette Lighter
PartNumber: 25776667
Product Specifications- Item Dimensions: 2.8 x 1.6 x 1.2 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12450043
- Part Description: 2008 Cadillac DTS Receptacle Asm, Cigarette Lighter
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$12.58 MSRP:$18.70You Save: $6.12 (33%)
OEM (Genuine) 2008 Cadillac DTS Lighter Assembly
PartNumber: 11516141
Product Specifications- Other Names: Lighter, Lighter Assembly, Tray
- Item Dimensions: 2.4 x 1.4 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999434, 3534408, 14004942, 17057195, 344802, 90566933, 00344802, 01999434, 10025707, 03534408
- Part Description: 2008 Cadillac DTS Lighter Assembly
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$8.97 MSRP:$12.87You Save: $3.90 (31%)
OEM (Genuine) 2008 Cadillac DTS Lighter
PartNumber: 23202298
Product Specifications- Other Names: Lighter
- Item Dimensions: 2.3 x 1.4 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 1999433, 25617713, 10098576, 25600663, 01999433, 10060404, 11516146, 11516140
- Part Description: 2008 Cadillac DTS Lighter
Vehicle Fitment- 2008 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
$13.06
FAQ for Cigarette Lighters Repair
Q: What's the preliminary procedure for replacing the left engine splash shield?
A:
The procedure is to remove the left wheel assembly.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when installing the spot lamp bulb retaining clip?
A:
You will need to ensure that the spot lamp assembly must be clocked in the UP position.
By Bob
GM Specialist
29/10/2022Q: How many engine splash shield plastic retainers are needed when installing the left engine splash shield?
A:
3engine splash shield plastic retainers attach.
By Bob
GM Specialist
29/10/2022Q: How to remove the spot lamp bulb (Impala RPO 7X6, 7X7)?
A:
You will need to remove the spot lamp wiring harness push-in retainer from the windshield garnish molding, disconnect the electrical connector, remove the screw from the spot lamp bezel, remove the spot lamp bezel from the spot lamp, remove the lamp from the spot lamp, remove spot lamp bulb retaining clip and remove the spot lamp bulb from the spot lamp, then disconnect the spot lamp bulb electrical connector.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the spot lamp bezel screws?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
29/10/2022Q: How do you remove the receptacle?
A:
You can look into the receptacle, then place one side of the °T° portion of the J 42059 into the tab window, insert the other side of the °T° into the opposite tab window, and use the J 42059 to pull the receptacle straight out.
By Bob
GM Specialist
29/10/2022Q: What should be done if J 42059 tool fails to release the lighter socket from the retainer?
A:
You will need to insert a small grinding tool with a cutoff wheel into the socket, remove the plastic latches in the 3 mm (0.11 in) square windows, and use the J 42059 as directed above to remove the socket.
By Bob
GM Specialist
29/10/2022Q: What's the proper way to install the cigar lighter receptacle or 12-volt accessory power receptacle?
A:
The proper way is to route the connector through the retainer, install the retainer by pressing it into place fully seated, connect the electrical connector to the receptacle, align the tabs on the receptacle to the slots in the retainer, then install the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022See more FAQs (3)