First, you need to remove the transmission oil pan and filter, the electrical connector passage sleeve, the valve body bolts, and the upper and lower control valve body assembly. Then, please disconnect the speed sensor electrical connector, turn the control valve body assembly over, and disconnect the manual shift shaft position switch connector. Finally, you should remove the bolt and remove the manual shift shaft position switch assembly, remove the 2 bolts from the °heat sink° side of the control solenoid valve assembly, remove the 5 bolts and the 4 bolts securing the control solenoid valve assembly to the control valve body assembly, remove the control valve body assembly and the filter plate assembly.
By BobGM Specialist
02/11/2022