Q: What is the recommended torque for the transmission fluid cooler pipe brace bolt?
A:
The recommended torque is 50Nm(37 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the transmission fluid cooler pipe bolt?
A:
The recommended torque is 25Nm(18 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What will need to be done before the Automatic Transmission Fluid, Fluid Pan, and/or Filter Replacement?
A:
First, you need to reposition the condenser to access the transmission oil cooler lines. Then, please remove the air cleaner assembly. Finally, you should raise and support the vehicle to remove the front air deflector.
By Bob
GM Specialist
01/11/2022
Q: What will need to be done before the Transmission Fluid Cooler Pipe Replacement-Front?
A:
First, you need to reposition the condenser to access the transmission oil cooler lines. Then, please remove the air cleaner assembly. Finally, you should raise and support the vehicle to remove the front air deflector.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque for the 2 "heat sink" bolts?
A:
The recommended torque is 8Nm(6 lb-ft).
Q: What will need to be done before the Automatic Transmission Fluid, Fluid Pan, and/or Filter Replacement?
A:
You need to raise and support the vehicle and place a suitable drain pan under the transmission.
Q: What will need to be done before replacing the Transmission Mount?