< Back ×
My Vehicle Change Vehicle
2008 Buick Enclave
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 Buick Enclave Throttle Body
PartNumber: 12694873
Product Specifications- Notes: Acadia;Enclave, Traverse
- Other Names: Throttle Body
- Item Dimensions: 8.2 x 6.9 x 5.5 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593591, 12616995
- Part Description: 2008 Buick Enclave Throttle Body
Vehicle Fitment- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
$223.44 MSRP:$421.60You Save: $198.16 (48%)
Dorman® Throttle Body Assemblies for 2008 Buick Enclave
PartNumber: 977-351Product Specifications- Adjustable: No
- Bore Diameter: 2.893''
- Color/Finish: Metal
- Connector/Terminal Type: Blade
- Electrical Connection Type: Female Socket
- Fuel Injectors Included: No
- Fuel System Type: Gas
- Gasket or Seal Included: No
- Housing Material: Cast Aluminum
- Idle Air Control Motor Included: No
- Inlet Quantity: 0
- Installation Hardware Included: No
- Outlet Quantity: 0
- UPC: 019495280811
- Part Description: 2008 Buick Enclave Throttle Body Assemblies
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
$128.84
Cardone Reman® Remanufactured Throttle Body for 2008 Buick Enclave
PartNumber: 67-3018Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- E-Waste: Yes
- Gaskets Included: No
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 Buick Enclave Remanufactured Throttle Body
Vehicle Fitment- 2008 Buick Enclave | All Trims | 6 Cyl 3.6L
$93.52
FAQ for Throttle Body Repair
Q: How do you inspect and clean the Throttle Body Inspection and Cleaning?
A:
You need to remove the air cleaner outlet duct, inspect the throttle body bore and the throttle valve plate for deposits, clean the throttle body bore and the throttle valve plate, and then install the air cleaner outlet duct.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Throttle Body Assembly?
A:
You need to remove the air cleaner outlet duct, disconnect the engine wiring harness electrical connector from the electronic throttle control, and then remove the throttle body bolts, the throttle body, and the gasket.
By Bob
GM Specialist
02/11/2022Q: How do you learn the Throttle Without Scan Tool?
A:
You need to start and idle the engine in the park for 3 minutes, monitor desired and actual RPM, ignition off for 60 seconds, start and idle the engine in the park for 3 minutes, and once the engine speed has returned to normal, clear DTCs and returns to the diagnostic that referred you here.
By Bob
GM Specialist
02/11/2022Q: How do you install the Throttle Body Assembly?
A:
You need to position a new throttle body gasket and throttle body to the upper intake manifold, install the throttle body bolts, connect the engine wiring harness electrical connector to the electronic throttle control, install the air cleaner outlet duct, and then perform the throttle learn procedure.
By Bob
GM Specialist
02/11/2022Q: How do you reset the Throttle with Scan Tool?
A:
You need to ignition on, and the engine off, with a scan tool, perform the Idle Learn Reset in Module Setup, start the engine, monitor the TB Idle Airflow Compensation parameter, and then clear the DTCs and return to the diagnostic that referred you here.
By Bob
GM Specialist
02/11/2022