Notes: For Compressor Belt, WARNING SEE TECH BULLETIN
Belt Type: Serpentine
Direction: Clock Wise
Number Of Pulleys: 1
Pulley 1 Diameter: 60
Pulley 1 Flat: Y
Pulley 1 Width: 20
UPC: 036687244161
Part Description: 2007 GMC Sierra 3500 HD No Slack Automatic Belt Tensioner Assembly
More Info
Vehicle Fitment
2007 GMC Sierra 3500 HD | All Trims | 8 Cyl 6.0L
$32.35
FAQ for Belt Tensioner Repair
Q: How to remove the Drive Belt Tensioner?
A:
You should remove the accessory drive belt, the drive belt tensioner bolts, and the drive belt tensioner.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the drive belt tensioner bolts?
A:
The recommended torque is 50 N.m (37 LB-FT).
By Bob
GM Specialist
29/10/2022
Q: How to install the drive belt tensioner?
A:
You should place the drive belt tensioner on the water pump, install the drive belt tensioner bolts and then install the accessory drive belt.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the A/C drive belt tensioner bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
29/10/2022
Q: How to remove the belt tensioner?
A:
You can remove the air conditioning (A/C) drive belt, the A/C drive belt tensioner bolts, and the A/C drive belt tensioner.
By Bob
GM Specialist
29/10/2022
Q: How to install the belt tensioner?
A:
You can place the A/C drive belt tensioner to the A/C compressor bracket, install the A/C drive belt tensioner bolts and then install the A/C drive belt.
By Bob
GM Specialist
29/10/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to install the drive belt idler pulley?
A:
You should place the drive belt Idler Pulley to the generator bracket and tighten the idler pulley bolt finger tight, tighten the drive belt idler pulley bolt and then install the accessory drive belt.
Q: What is the removal procedure for the timing chain and sprocket?
A:
The procedure is to remove the oil pump, the starter motor, the CMP actuator solenoid valve, the CMP actuator and Timing Chain, the timing chain tension bolts, the crankshaft sprocket, and the crankshaft sprocket key.
Q: How to remove the drive belt?
A:
You can remove the air cleaner outlet duct, the Drive Belt, and the breaker bar and socket from the drive belt tensioner bolt.